Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Juniper JN0-130 à la première fois.
Bien qu'il ne soit pas facile à réussir le test Juniper JN0-130, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Juniper JN0-130, mais encore à vous aider d'économiser votre temps.
Code d'Examen: JN0-130
Nom d'Examen: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
Questions et réponses: 128 Q&As
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Juniper JN0-130 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
En quelques années, le test de certification de Juniper JN0-130 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Juniper JN0-130? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification JN0-130. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification JN0-130, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Juniper JN0-130 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Juniper JN0-130.
Après une longue attente, les documentations de test Juniper JN0-130 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Juniper JN0-130 à la première fois.
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Juniper JN0-130. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Juniper JN0-130 sans aucune doute.
JN0-130 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-130.html
NO.1 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C
certification Juniper JN0-130 examen JN0-130
NO.2 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A
certification Juniper JN0-130 JN0-130 examen JN0-130
NO.3 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C
Juniper examen JN0-130 examen JN0-130 examen JN0-130
NO.4 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A
Juniper JN0-130 JN0-130 certification JN0-130 JN0-130 examen
NO.5 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D
Juniper examen certification JN0-130 certification JN0-130 JN0-130 examen
NO.6 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE
certification Juniper certification JN0-130 JN0-130 JN0-130
NO.7 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD
Juniper JN0-130 JN0-130 certification JN0-130
NO.8 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D
Juniper certification JN0-130 certification JN0-130 certification JN0-130 certification JN0-130
NO.9 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE
Juniper examen certification JN0-130 JN0-130 JN0-130
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D
Juniper JN0-130 JN0-130 examen
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C
Juniper JN0-130 JN0-130 JN0-130 certification JN0-130 JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C
Juniper certification JN0-130 JN0-130 certification JN0-130
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D
certification Juniper JN0-130 examen certification JN0-130 JN0-130 JN0-130 examen JN0-130 examen
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D
Juniper examen JN0-130 JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A
certification Juniper JN0-130 examen JN0-130 examen
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B
certification Juniper JN0-130 examen JN0-130 examen JN0-130 examen certification JN0-130
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B
Juniper examen JN0-130 JN0-130 JN0-130 examen JN0-130 certification JN0-130
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A
certification Juniper JN0-130 JN0-130 JN0-130 examen
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC
certification Juniper certification JN0-130 JN0-130 certification JN0-130 JN0-130 examen certification JN0-130
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C
Juniper certification JN0-130 JN0-130
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C
Juniper JN0-130 examen JN0-130 certification JN0-130 JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE
Juniper examen JN0-130 JN0-130 JN0-130 examen
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B
Juniper JN0-130 examen certification JN0-130 certification JN0-130 JN0-130
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C
Juniper examen certification JN0-130 JN0-130 certification JN0-130 JN0-130
NO.10 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A
certification Juniper JN0-130 examen JN0-130 examen certification JN0-130 JN0-130
NO.11 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE
Juniper examen JN0-130 examen JN0-130 examen JN0-130 examen
NO.12 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D
certification Juniper certification JN0-130 JN0-130 JN0-130 examen certification JN0-130
NO.13 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B
certification Juniper JN0-130 certification JN0-130 certification JN0-130
NO.14 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD
Juniper examen JN0-130 certification JN0-130 JN0-130
NO.15 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper examen JN0-130 JN0-130 examen certification JN0-130
Finalement, la Q&A Juniper JN0-130 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Juniper JN0-130 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Juniper, vous aurez un meilleur salaire et une plus grande space à se développer.
没有评论:
发表评论