Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Juniper JN0-101.
Si vous vous inscriez le test Juniper JN0-101, vous devez choisir une bonne Q&A. Le test Juniper JN0-101 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Juniper JN0-101 dans Pass4Test pour se former avant le test Juniper JN0-101.
Code d'Examen: JN0-101
Nom d'Examen: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
Questions et réponses: 190 Q&As
En quelques années, le test de certification de Juniper JN0-101 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Juniper JN0-101? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification JN0-101. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification JN0-101, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
Pass4Test peut offrir la facilité aux candidats qui préparent le test Juniper JN0-101. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Juniper JN0-101 selon le résumé de test réel Juniper JN0-101. Vous pouvez réussir le test à la première fois sans aucune doute.
Participer au test Juniper JN0-101 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Juniper JN0-101 symbole bien la professionnalité d'un travailleur dans cette industrie.
JN0-101 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-101.html
NO.1 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A
Juniper JN0-101 JN0-101 examen
NO.2 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D
Juniper examen certification JN0-101 certification JN0-101 certification JN0-101 certification JN0-101 JN0-101 examen
NO.3 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB
Juniper examen JN0-101 JN0-101 certification JN0-101
NO.4 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A
Juniper JN0-101 certification JN0-101 JN0-101 JN0-101
NO.5 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D
certification Juniper JN0-101 examen JN0-101
NO.6 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD
Juniper JN0-101 examen certification JN0-101
NO.7 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A
certification Juniper JN0-101 JN0-101
NO.8 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B
Juniper JN0-101 examen JN0-101 examen JN0-101 examen certification JN0-101
NO.9 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A
certification Juniper JN0-101 JN0-101 examen
NO.10 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C
Juniper certification JN0-101 JN0-101 examen
NO.11 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD
certification Juniper JN0-101 JN0-101
NO.12 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD
Juniper examen JN0-101 examen JN0-101 examen certification JN0-101
NO.13 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC
Juniper JN0-101 examen certification JN0-101 certification JN0-101 certification JN0-101 certification JN0-101
NO.14 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D
Juniper JN0-101 JN0-101 examen JN0-101 JN0-101 JN0-101 examen
NO.15 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A
Juniper certification JN0-101 JN0-101 JN0-101 examen
NO.16 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C
Juniper JN0-101 JN0-101 JN0-101 examen JN0-101
NO.17 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD
certification Juniper JN0-101 JN0-101 JN0-101 examen
NO.18 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C
Juniper JN0-101 certification JN0-101
NO.19 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D
Juniper JN0-101 JN0-101 certification JN0-101 JN0-101 examen
NO.20 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC
certification Juniper certification JN0-101 JN0-101
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
没有评论:
发表评论