Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Si vous vous inscriez le test HP HP0-S33, vous devez choisir une bonne Q&A. Le test HP HP0-S33 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Si vous faites toujours la lutte contre le test HP HP0-S33, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de HP HP0-S33. Si vous avez déjà décidé à s'améliorer via HP HP0-S33, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Code d'Examen: HP0-S33
Nom d'Examen: HP (Advanced Integration and Management of HP Server Solutions)
Questions et réponses: 79 Q&As
Le test HP HP0-S33 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test HP HP0-S33 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification HP HP0-S33.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test HP HP0-S33 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo HP HP0-S33 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test HP HP0-S33 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test HP HP0-S33.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
HP0-S33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-S33.html
NO.1 What can you configure with the BladeSystem Insight Display on a c7000 enclosure? (Select
three)
A. Rack name
B. Power mode
C. Number of fans installed
D. OA1 IP address
E. Blade name
F. Midplane serial number
Answer: A,B,D
HP HP0-S33 HP0-S33 HP0-S33 HP0-S33
Reference:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00698534 /c00698534.pdf(page 13)
NO.2 A customer complained of slow performance on an HP ProLiant server. You upgraded to faster
processes and added memory to the server. What should you create after you change the server
hardware configuration?
A. New performance baseline
B. Insight Diagnostics report
C. CPU Stress report
D. Memory Validation report
Answer: A
certification HP certification HP0-S33 HP0-S33
NO.3 A customer is running HP SIM in a headquarters that has three branch offices with multiple
server blades managed by the HP SIM in a central location. Version Control Repository Manager is
configured in all branch offices, but all deployment tasks should be performed from the central
location. What must you configure first?
A. all remote VCRMs properly licensed
B. Secure tunnel between headquarters and the branch offices
C. Additional CMS server in the brach offices that will not perform any management function and
will work as a federated CMS and give access to the local VCRM
D. Trust relationship between HP SIM and the machines running VCRM in remote locations
Answer: D
HP HP0-S33 examen certification HP0-S33 HP0-S33 examen HP0-S33
NO.4 To protect virtual running on multiple ESXi 5.0 hosts, a customer decides to configure a High
Availability cluster. What are the requirements for this type of cluster?
A. The management network must be configured with the Fast Tolerant option enabled.
B. Enhanced VMotion compatibility mode and Storage DRS must be enabled on the cluster level.
C. Virtual machine must be stored on the datastore available from each member of the cluster.
D. The cluster must be configured using Host Profiles.
Answer: C
HP certification HP0-S33 HP0-S33
Explanation:
Requirements for a VMware HA Cluster Review this list before setting up a VMware HA cluster. For
more information, follow the appropriate cross reference or see Creating a VMware HA Cluster.
All hosts must be licensed for VMware HA. You need at least two hosts in the cluster. All hosts need
a unique host name. All hosts need to be configured with static IP addresses. If you are using DHCP ,
you must ensure that the address for each host persists across reboots. All hosts must have access
to the same management networks. There must be at least one management network in common
among all hosts and best practice is to have at least two. Management networks differ depending
on the version of host you are using. ESX hosts - service console network. ESXi hosts earlier than
version 4.0 - VMkernel network. ESXi hosts version 4.0 and later - VMkernel network with the
Management Network checkbox enabled.
See Networking Best Practices. To ensure that any virtual machine can run on any host in the cluster,
all hosts should have access to the same virtual machine networks and datastores. Similarly, virtual
machines must be located on shared, not local, storage otherwise they cannot be failed over in the
case of a host failure. For VM Monitoring to work, VMware tools must be installed. See VM and
Application Monitoring. All hosts in a VMware HA cluster must have DNS configured so that the
short host name (without the domain suffix) of any host in the cluster can be resolved to the
appropriate IP address from any other host in the cluster. Otherwise, the Configuring HA task could
fail. If you add the host using the IP address, also enable reverse DNS lookup (the IP address should
be resolvable to the short host name).
NO.5 A customer needs a direct attached based storage for a BladeSystem and wants a solution that
enables low cost zoned or shared storage.
Which type of HP external storage meets the customer requirements?
A. Direct Connect SAS storage
B. Infiniband
C. Fibre Channel over Ethernet
D. Serial Attached SCSi
Answer: A
certification HP certification HP0-S33 HP0-S33 examen HP0-S33
Explanation:
http://h18006.www1.hp.com/products/storageworks/sas_solution/index.html (Overview, first para)
With the direct connect SAS storage for HP BladeSystem, HP extends and redefines direct-attached
storage for BladeSystem servers. Now you can build local server storage on the fly with zoned
storage, or enable low cost shared storage within the rack
NO.6 Which Windows performance counter can be used to check for a Smart Array disk bottleneck
problem?
A. Logical Disk: Average Disk Queue Length
B. Physical Disk: Average Disk Queue length
C. Logical Disk: Average Disk Write Queue Length
D. Physical Disk: Average Disk Write Queue Length
Answer: B
HP HP0-S33 HP0-S33 examen certification HP0-S33 HP0-S33
NO.7 You want to create a service template using I/O Designer that will be deployed to the Hyper-V
host. Currently, only VMware templates have been used in this environment.
How must you prepare a virtual machine template to use for this template?
A. Use the Insight Control Server migration functionality to migrate the VM from VMware to
Hyper-V and then use the vCenter server to prepare the template recognized by I/O.
B. You can use VMware templates for Hyper-V deployment since I/O is virtualization layer
independent.
C. Use the I/O converter tool to convert the VMware template to change it to the correct format.
D. Create a virtual machine template using Insight Control virtual machine management
functionality.
Answer: D
HP examen HP0-S33 examen HP0-S33 certification HP0-S33
NO.8 When developing an implementation Plan, what does the acceptance criteria establish?
A. Exit criteria for transactioning the system into production
B. Minimum level of performance required for plan continuation
C. Authorization to continue toward funding of the project
D. Authorization to start or implement the project plan
Answer: C
HP examen HP0-S33 HP0-S33 examen certification HP0-S33
NO.9 Which host is selected as a master host in the VMware HA cluster?
A. The host with access to the greatest number of the datastores
B. The host with the redundancy configured for management network
C. The host with the greatest number of virtual machines configured with fault tolerance
D. The host with the greatest CPU and memory capacity
Answer: A
certification HP HP0-S33 HP0-S33 examen certification HP0-S33
Explanation:
http://pubs.vmware.com/vsphere50/index.jsp?topic=%2Fcom.vmware.vsphere.avail.doc_50%2FGU
IDB9ACCE9B-A14D-4B2F87EF-4B0A67ABDF58.html
When you add a host to a vSphere HA cluster, an agent is uploaded to the host and configured to
communicate with other agents in the cluster. Each host in the cluster functions as a master host or
a slave host. When vSphere HA is enabled for a cluster, all active hosts (those not in standby or
maintenance mode, or not disconnected) participate in an election to choose the cluster's master
host. The host that mounts the greatest number of datastores has an advantage in the election.
Only one master host exists per cluster and all other hosts are slave hosts. If the master host fails, is
shut down, or is removed from the cluster a new election is held.
NO.10 You are experiencing problems with a Virtual Connect domain and want to verify the domain
status. Which tool can you use to perform a domain health check?
A. Service Pack for ProLiant
B. Active System Health Log
C. Virtual Connect Active Health
D. Virtual Connect Support Utility
Answer: D
HP HP0-S33 examen certification HP0-S33 HP0-S33 HP0-S33 HP0-S33
Reference:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01566977 /c01566977.pdf (page
17, see step 2)
Step 2-Run a health check on the Virtual Connect domain
1. From a local system with VCSU installed, execute the following command:
vcutil -a healthcheck -i <Primary OA IP> -u <OA Admin account> -p <OA password>
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test HP HP0-S33. Pass4Test a une expérience riche pour répondre les demandes des candidats.
没有评论:
发表评论