Dépenser assez de temps et d'argent pour réussir le test Juniper JN0-343 ne peut pas vous assurer à passer le test Juniper JN0-343 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-343. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Juniper JN0-343. Cet outil de formation est convenable pour les candidats de test Juniper JN0-343. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Pass4Test est un seul site de provider le guide d'étude Juniper JN0-343 de qualité. Peut-être que vous voyiez aussi les Q&A Juniper JN0-343 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 393 Q&As
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Juniper JN0-343, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Il y a nombreux façons à vous aider à réussir le test Juniper JN0-343. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Juniper JN0-343 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Juniper JN0-343 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.
JN0-343 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-343.html
NO.1 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
certification Juniper JN0-343 examen certification JN0-343 JN0-343
NO.2 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 examen JN0-343
NO.3 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper examen certification JN0-343 certification JN0-343 JN0-343 certification JN0-343
NO.4 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
certification Juniper JN0-343 examen JN0-343 examen JN0-343 JN0-343
NO.5 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
certification Juniper JN0-343 JN0-343 examen JN0-343
NO.6 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper JN0-343 JN0-343 examen certification JN0-343 JN0-343
NO.7 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper examen JN0-343 JN0-343
NO.8 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper JN0-343 JN0-343 JN0-343
NO.9 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343 examen JN0-343 JN0-343 examen JN0-343
NO.10 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper examen JN0-343 certification JN0-343 JN0-343 examen JN0-343 JN0-343
NO.11 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
certification Juniper certification JN0-343 JN0-343 certification JN0-343 JN0-343
NO.12 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 certification JN0-343 JN0-343 examen
NO.13 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper JN0-343 certification JN0-343
NO.14 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
certification Juniper JN0-343 JN0-343 JN0-343 examen certification JN0-343
NO.15 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper certification JN0-343 JN0-343 JN0-343 JN0-343 examen
NO.16 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343 certification JN0-343 certification JN0-343
NO.17 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
certification Juniper JN0-343 JN0-343
NO.18 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper examen certification JN0-343 certification JN0-343 JN0-343 JN0-343
NO.19 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
certification Juniper JN0-343 JN0-343 JN0-343 examen
NO.20 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
certification Juniper JN0-343 JN0-343 JN0-343 JN0-343
NO.21 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper examen JN0-343 examen certification JN0-343 JN0-343 JN0-343 examen
NO.22 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 JN0-343 JN0-343 examen
NO.23 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343 examen JN0-343 examen JN0-343 examen JN0-343
NO.24 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
certification Juniper JN0-343 examen JN0-343 JN0-343 JN0-343
NO.25 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper JN0-343 certification JN0-343 JN0-343
NO.26 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
certification Juniper JN0-343 examen certification JN0-343
NO.27 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper examen JN0-343 JN0-343 JN0-343 examen JN0-343 examen JN0-343
NO.28 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
certification Juniper JN0-343 JN0-343 examen JN0-343 JN0-343 JN0-343
NO.29 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
certification Juniper certification JN0-343 JN0-343 certification JN0-343
NO.30 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper certification JN0-343 JN0-343 examen
Le test Certification Juniper JN0-343 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Juniper JN0-343. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Juniper JN0-343.
没有评论:
发表评论