Dernières EMC E20-475 de la pratique de l'examen questions et réponses téléchargement gratuit

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test EMC E20-475 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

La partie plus nouvelle de test Certification EMC E20-475 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel EMC E20-475. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

C'est pas facile à passer le test Certification EMC E20-475, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test EMC E20-475 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test EMC E20-475, vous allez passer le test EMC E20-475 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Bien qu'il ne soit pas facile à réussir le test EMC E20-475, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test EMC E20-475, mais encore à vous aider d'économiser votre temps.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test EMC E20-475. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Choisir le Pass4Test peut vous aider à réussir 100% le test EMC E20-475 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Code d'Examen: E20-475
Nom d'Examen: EMC (Content Management Systems Architecture Exam)
Questions et réponses: 231 Q&As

Vous avez aussi la possibilité à réussir le test EMC E20-475. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

E20-475 Démo gratuit à télécharger: http://www.pass4test.fr/E20-475.html

NO.1 Your client's Content Servers are running on Sun/Oracle. These servers have numerous custom
applications installed and have been ugpraded several times. Security and regulatory considerations
preclude the copying of certain production data to non-production systems. The client's
configuration/change management processes and systems are incomplete or missing. You are tasked
with drafting a plan to copy a repository from the production environment to a development environment in
preparation for an upgrade.
Which process should you use to ensure that the new development environment is as similar to the
production environment as possible?
A. install Content Server in the development environment using the same docbase id as the production
environment
use the Oracle Import/Export tools to export the production database and import it into the
development environment
modify various configuration data to conform to the development environment
copy a subset of the production content to the development storage
B. install Content Server in the development environment using the same docbase id as the production
environment
use the Dump and Load utility to transfer data and metadata from the production environment to the
development environment
modify various configuration data to conform to the development environment
use DQL/DFC applications to delete potentially sensitive data from the development environment
C. copy the entire $DOCUMENTUM directory and all subdirectories from the production to the
development environment
use the Dump and Load utility to transfer data and metadata from the production environment to the
development environment
modify various configuration data to conform to the development environment
D. copy the entire $DOCUMENTUM directory and all subdirectories from the production to the
development environment
use the Oracle Import/Export tools to export the production database and import it into the
development environment
modify various configuration data to conform to the development environment
create a dm_location object and filestore in the production system pointing to the development
storage
use the Migrate Content method with an appropriate DQL qualifier to copy a non-restricted subset of
the production content to the development filestores
remove the new dm_location and dm_filestore objects
Answer: D

certification EMC   E20-475   E20-475   E20-475 examen

NO.2 What is the proper sequence of steps for upgrading Content Server and Document Transformation
Services (DTS)?
A. uninstall Content Server
uninstall DTS
install Content Server
install DTS
add DTS Support to repository
B. remove DTS Support from repository
uninstall DTS upgrade Content Server
install DTS
add DTS Support to repository
C. upgrade Content Server
remove DTS Support from repository
uninstall DTS
install DTS
add DTS support to repository
D. remove DTS Support from repository
upgrade Content Server
uninstall DTS
install DTS
add DTS support to repository
Answer: B

EMC   E20-475   certification E20-475   E20-475 examen

NO.3 Which is a supported path for upgrading a Content Server to D6?
A. 4i > 5.2.5 > 6
B. 5.2 > 5.2.5 > 6
C. 4i > 5.3 > 6
D. 5.2.5 > 5.3 > 6
Answer: D

EMC examen   E20-475   E20-475 examen   E20-475 examen   E20-475 examen

NO.4 Which Application Server does D6 Content Server install for its internal use?
A. BEA Weblogic
B. Oracle AS
C. Apache Tomcat
D. IBM WebSphere
Answer: A

EMC   E20-475   E20-475 examen

NO.5 You are tasked with performing a Content Server upgrade.
To accomplish this, you do the following:
You first make a repository copy of the production repository by installing the Content Server.
You then create a new repository.
You then copy the database and file storage areas from production to the new environment.
To be successful, what must be true of the new repository copy after this operation is complete?
A. It must have the same Docbase ID as the production repository.
B. It must have a different owner than the production repository.
C. It must project to the same Connection Broker as the production repository.
D. It must have the same Database Connection string as the production repository.
Answer: A

EMC examen   E20-475   E20-475   E20-475

NO.6 Which file(s) handle client configuration in D6?
A. dmcl.ini only
B. dfc.properties only
C. dmcl.ini and dfc.properties
D. dmclfull.ini only
Answer: B

EMC   certification E20-475   E20-475

NO.7 Before upgrading the Content Server software, which job do you need to run to find sysobjects that
point to non-existent content?
A. Content Warning
B. Consistency Checker
C. Dmclean
D. State of the Repository Report
Answer: B

EMC   certification E20-475   certification E20-475

NO.8 What is the supported procedure for rolling back an upgrade of Documentum Content Server?
A. uninstall the current version, then reinstall the previous version
B. run the uninstaller for the current version and run the Data Dictionary Publish job
C. remove the directory under %DOCUMENTUM%/product for the current version, change server.ini file
and dm_server_config, dm_docbase_config objects
D. restore the system from backup
Answer: D

EMC   E20-475 examen   E20-475

NO.9 In addition to core software upgrade considerations, which component of a Documentum system are
most likely to require additional work?
A. software use cases
B. network topology
C. data center architecture
D. application customizations
Answer: D

certification EMC   E20-475 examen   E20-475 examen

NO.10 A client has a Content Server, Site Caching Services (SCS), Content Transformation Services (CTS),
and Full-text Indexes installed on Windows/Oracle servers. The client wants to migrate Documentum
applications to Linux.
Which statement is true?
A. The client must migrate Oracle servers to Linux.
B. SCS is not supported on Linux.
C. CTS is not supported on Linux.
D. Content Server is not supported on Linux/Oracle.
Answer: C

EMC   E20-475 examen   E20-475

NO.11 A client wants to upgrade a repository from 5.2.5 to 5.3. The repository has 8 million content objects
with an average size of 50K. The full text searching capability is required to be available within 24 hours of
the repository upgrade. The Full-text Index Server is installed on a separate server. The upgrade is
scheduled to happen in two months.
How can the client accomplish this objective?
A. configure an Index Agent in normal mode to operate against the 5.2.5 repository
create the Full-text Indexes
run the ftintegrity tool to identify documents that were not indexed, and resubmit those documents for
indexing
upgrade the Content Server and the repository
B. upgrade the Content Server and the repository
configure an Index Agent in normal mode to operate against the upgraded repository
create the Full-text Indexes
C. configure a 5.3 Index Agent in migration mode to operate against the 5.2.5 repository
create the Full-text Indexes.
run the ftintegrity tool to identify documents that were not indexed, and resubmit those documents for
indexing
upgrade the Content Server and the repository
shut down the migration-mode Index Agent and change it to a normal-mode Index Agent.
D. upgrade the Content Server and the repository
configure an Index Agent in migration mode to operate against the upgraded repository
create the Full-text Indexes.
shut down the migration-mode Index Agent and change it to a normal-mode Index Agent
Answer: C

EMC examen   E20-475 examen   certification E20-475   E20-475 examen   certification E20-475

NO.12 What is required for using Business Object Framework 2 (BOF 2)?
A. a dfc.properties file on all client machines such as application servers
B. a DBOR.properties and a dfc.properties file on all client machines such as application servers and a
global registry repository
C. a DBOR.properties file on all client machines and a global registry repository
D. a global registry repository and a dfc.properties file on all client machines
Answer: D

certification EMC   E20-475   certification E20-475   E20-475 examen

NO.13 What is the correct sequence of steps for upgrading Content Server and Full-text Index Server?
A. uninstall Full-text Index Server delete Index Agents upgrade Content Server install Index Agents install
Full-text Index Server
B. upgrade Content Server uninstall Full-text Index Server delete Index Agents install Index Agents install
Full-text Index Server
C. delete Index Agents uninstall Full-text Index Server upgrade Content Server install Full-text Index
Server install Index Agents
D. delete Index Agents upgrade Full-text Index Server upgrade Content Server install Index Agents
Answer: C

EMC   E20-475 examen   E20-475   E20-475 examen   E20-475

NO.14 You are planning the upgrade of your Content Server software with Branch Office Caching Service
(BOCS) on a remote site. The repository has approximately one million objects with 400 GB of content
and 350 GB of full-text indexes. The BOCS cache has 20 GB of content.
What must be backed up before starting with the upgrade?
A. content, full-text index, and database
B. content, full-text index, and BOCS cache
C. full-text index, database, and BOCS cache
D. content, database, and BOCS cache
Answer: A

EMC   E20-475   certification E20-475   E20-475

NO.15 Which file replaces the pre-D6 dmcl.ini?
A. dfc.properties
B. docbroker.ini
C. java.ini
D. dbor.properties
Answer: A

certification EMC   E20-475 examen   E20-475   E20-475   E20-475 examen

NO.16 Which statement is true about the dump and load operation?
A. Aspects associated with a dumped object are not included in the dump file.
B. Content stored in external file storage may be included in a dump file, but blob or turbo storage may
not.
C. The source and target repositories must be the same version, but may use different code pages.
D. Objects in the target repository will always have the same r_object_id as the corresponding object in
the source repository.
Answer: A

EMC examen   certification E20-475   E20-475   certification E20-475

NO.17 After an upgrade from a pre 5.3 version to 5.3 or 6, what can you do to remove the Verity Full-text Index
components?
A. You delete the Verity Full-text Index components via Documentum Administrator after the upgrade.
B. The Content Server upgrade procedure deletes the Full-text. Just the empty/fulltext/Verity directory
needs to be deleted in the DOCUMENTUM directory.
C. You do not delete the Verity Full-text Index. The new Fast Full-text installation needs the data for
migration.
D. You delete the Documentum type dmi_tdk_index and the Full-text data in DOCUMENTUM/data
directory.
Answer: B

EMC   E20-475   E20-475   E20-475

NO.18 A client wants to upgrade their Documentum system from 5.3 SP3 to D6, but does not have the
resources to upgrade and test web applications such as Webtop and Content Server components within a
single downtime window. The client asks whether the upgrade can be phased, and if so which
components should be upgraded first.
What is the correct response to the customer's question?
A. Web applications must be upgraded before the Content Server.
B. Web applications must be upgraded after the Content Server is upgraded.
C. Web applications may be upgraded before or after the Content Server is upgraded.
D. Web applications do not need to be upgraded to make use of D6 features.
Answer: C

EMC   E20-475   E20-475 examen   certification E20-475   E20-475   E20-475

NO.19 A client is migrating their repositories from Windows to Linux. The database server is Oracle. The
content file stores are on NAS and made available over CIFS. For the migration, the client has done the
following:
installed Content Server and Oracle client on Linux using an installation owner account with the same
name on Windows
copied the tnsnames.ora from Windows to Linux
configured replacement Connection Brokers
added Services entries for the repositories on the Linux Content Server environment
attached to the NAS storage using NFS
updated for each repository the web_server_loc, smtp_server, r_host_name, r_install_domain, and
projection target attributes for server config using SQL to reflect the new server name
Which minimal high-level steps does the client need to take to complete the migration?
A. copy all the configuration, and the aek.key files under %DOCUMENTUM%\dba Windows
to$DOCUMENTUM/dba on the Linux Content Server
update the user_auth_target, database_password_file, and Docbase Projection Target fields in each
server.ini
update the appropriate dm_location objects in the repositories using SQL to map to the new
locations</UL
B. copy all the configuration files under %DOCUMENTUM%\dba Windows to $DOCUMENTUM/dba on
the Linux Content Server
update the user_auth_target, database_password_file, and Docbase Projection Target fields in each
server.ini
update the appropriate dm_location objects in the repositories using SQL to map to the new locations
C. copy all the configuration, and the aek.key files under %DOCUMENTUM%\dba Windows to
$DOCUMENTUM/dba on the Linux Content Server
update the Docbase Projection Target fields in each server.ini
update the appropriate dm_location objects in the repositories using SQL to map to the new locations
D. copy all the configuration files under %DOCUMENTUM%\dba Windows to $DOCUMENTUM/dba on
the Linux Content Server
pdate the database_password_file, and Docbase Projection Target fields in each server.ini
update the appropriate dm_location objects in the repositories using SQL to map to the new locations
Answer: A

EMC   E20-475 examen   E20-475   E20-475 examen

NO.20 What is the recommended method for migrating Web Content Management (WCM) Page Builder
templates, blueprints, managed links, and associated content from a production environment to a testing
environment?
A. archive and install a DocApp
B. perform a repository-to-repository copy operation through WebPublisher
C. execute cabinet dump and load
D. use a deep export/import through WebPublisher
Answer: A

certification EMC   certification E20-475   E20-475   E20-475 examen

Le test EMC E20-475 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test EMC E20-475 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.

EMC E20-485 E20-822 E20-475 E20-465 E22-315 examen pratique questions et réponses

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification EMC E20-485 E20-822 E20-475 E20-465 E22-315. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test EMC E20-485 E20-822 E20-475 E20-465 E22-315 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test EMC E20-485 E20-822 E20-475 E20-465 E22-315 réel est lancée. C'est possible à réussir 100% avec le produit de EMC E20-485 E20-822 E20-475 E20-465 E22-315. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A EMC E20-485 E20-822 E20-475 E20-465 E22-315 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat EMC E20-485 E20-822 E20-475 E20-465 E22-315 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test EMC E20-485 E20-822 E20-475 E20-465 E22-315.

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Le test EMC E20-485 E20-822 E20-475 E20-465 E22-315 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test EMC E20-485 E20-822 E20-475 E20-465 E22-315. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification EMC E20-485 E20-822 E20-475 E20-465 E22-315. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Code d'Examen: E20-485

Nom d'Examen: EMC (Content Management Application Architecture Exam)

Questions et réponses: 139 Q&As

Code d'Examen: E20-822

Nom d'Examen: EMC (CLARiiON Solutions Expert Exam for Storage Administrators)

Questions et réponses: 120 Q&As

Code d'Examen: E20-475

Nom d'Examen: EMC (Content Management Systems Architecture Exam)

Questions et réponses: 231 Q&As

Code d'Examen: E20-465

Nom d'Examen: EMC (Content Management System Administration)

Questions et réponses: 169 Q&As

Code d'Examen: E22-315

Nom d'Examen: EMC (Disk Library and Backup to Disk Technologies)

Questions et réponses: 117 Q&As

E20-822 Démo gratuit à télécharger: http://www.pass4test.fr/E20-822.html

NO.1 A large warehousing company has two CLARiiONs with two LUNs set up and each is mirrored with
MirrorView/A over DWDM. The two sites are less than 1 km away.
The company is currently running an OLTP database on a 300 GB RAID 1/0 4+4 LUN and its logging on a
150 GB RAID 1/0 4+4 LUN. The I/O read/write ratio is 2:1 with a 2 kB average I/O size.
The customer notices that at peak times the latency becomes an issue as their users start to complain
about poor performance. What is your recommendation?
A.Check the fibre for faults
B.Upgrade the CLARiiON model
C.Use Incremental SAN Copy
D.Use MirrorView/S
Answer: D

EMC examen   E20-822   E20-822 examen

NO.2 You are using Replication Manager to make clones of two production Exchange mailbox database
LUNs. After reviewing the event log for the week, you notice there have been numerous failures but no
alerts have been sent out. Replication Manager was configured to send email alerts in case of an
Exchange job failure.
What is preventing the email alerts from being sent out?
A.MAPI32.DLL is missing on the Replication Manager server
B.Outlook was not installed on the Replication Manager server
C.The Replication Manager console was not configured to relay alerts
D.The SMTP service in IIS was not configured on the Replication Manager server
Answer: D

EMC examen   certification E20-822   E20-822   certification E20-822

NO.3 Click the Exhibit button.
What is true of LUN 3?
A.Disk crossings are excessively high
B.Disk utilization is above the best practices threshold
C.The host data is misaligned
D.The number of stripe crossings indicates a large I/O size
Answer: C

EMC   E20-822   E20-822 examen   E20-822 examen

NO.4 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A

certification EMC   E20-822   E20-822 examen

NO.5 A customer uses Incremental SAN Copy (ISC) as part of a DR solution. They have configured the
Reserved LUN Pool (RLP). They are adapting their environment to support different failure scenarios.
Which combination of failures is most serious?
A.A failure of the ISC update followed by a failure of the production LUN
B.A failure of the ISC update followed by a failure of the remote LUN
C.A failure of the link followed by a failure of the remote RLP
D.A failure of the RLP on the remote CLARiiON followed by a failure of the remote LUN
Answer: A

EMC   E20-822   E20-822

NO.6 Click the Exhibit button.
A customer uses multiple server preparation scripts; one for new Exchange servers and one for recovery.
These scripts are used to configure the CLARiiON storage using the Navisphere Secure CLI. The
customer calls and reports that they accidentally ran the new server preparation script instead of the
recovery script they intended to run.
The customer asks for a check to see if their data is still available from CLARiiON storage as they cannot
find their LUNs. The CLARiiON SP event logs show the data in the exhibit. Which method can the
customer use to correct the problem?
A.Rebind base and component LUNs, reform the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
B.Reform the metaLUN from the original base and component LUNs, place the metaLUN in SG for the
host, and recover the data from the backup.
C.Use CLARiiON recovery tools to recover the metaLUN, place the metaLUN in SG for the host, and
recover the data from the backup.
D.Use Navisphere Secure CLI tools to recover base and component LUNs, reform the metaLUN, and
place the metaLUN in SG for the host.
Answer: A

EMC   E20-822   E20-822   E20-822   certification E20-822

NO.7 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C

EMC examen   certification E20-822   E20-822   certification E20-822

NO.8 Click the Exhibit button.
A storage administrator is automating a solution using the Navisphere Secure CLI. In the event of
production data corruption, the script needs to recover from the target LUNs.
Which steps should the script perform?
P = Primary
S = Secondary
Snap = Snapshot
A.Unmount P, fracture, roll back Snap, synchronize, promote P, and mount P
B.Unmount P, promote S, fracture, roll back Snap, synchronize, promote P, and mount P
C.Unmount P, roll back Snap, promote S, fracture, synchronize, promote P, and mount P
D.Unmount P, roll back Snap, restore S, and mount P
Answer: B

certification EMC   E20-822   E20-822   E20-822 examen   E20-822

NO.9 A customer has been tasked with copying 50 LUNs between two CLARiiONs using SAN Copy. The
customer starts the sessions selecting all defaults. The resulting copies appear to be taking an
unexpectedly long time.
Which settings should be increased to improve performance?
A.Reserved LUN Pool Size, Concurrent sessions
B.Throttle Value, Concurrent sessions
C.Throttle Value, Reserved LUN Pool Size
D.Write cache, Reserved LUN Pool
Answer: B

EMC examen   E20-822   E20-822

NO.10 Click the Exhibit button.
A failure has occurred in a DR environment. The error message is displayed in the exhibit. What must be
done to correct the failure?
A.Add more LUNs to the remote CLARiiON RLP. Restart the synchronization.
B.Destroy the mirror. Add a secondary of the correct size.
C.Enable write cache on the remote CLARiiON Write Intent Logs. Restart the synchronization.
D.Increase the write cache size on the remote CLARiiON.
Answer: A

EMC   E20-822   certification E20-822   certification E20-822   certification E20-822   E20-822 examen

NO.11 A customer has a single RAID group with a RAID 1/0 6+6 LUN on a dedicated DAE2. This LUN is
active on SP A. They need to expand with the maximum possible increase in IOPS. The LUN may not go
offline. The customer has a new DAE2 with the same disks.
How should they proceed?
A.Add 12 disks to the current RAID group. Create a new LUN. Create a striped metaLUN.
B.Back up the current LUN. Create a new RAID group and a new LUN on SP B. Present it to the host and
create a LVM plaid. Restore the data.
C.Create a new RAID group and create a new LUN on SP A. Create a concatenated metaLUN.
D.Create a new RAID group and create a new LUN on SP A. Create a striped metaLUN.
Answer: D

certification EMC   E20-822   E20-822   E20-822   certification E20-822

NO.12 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D

EMC examen   E20-822   E20-822 examen

NO.13 A customer has configured SnapView for two LUNs on a DR CLARiiON storage system. When the
client attempts to run the Navisphere Secure CLI command to create the snapshot session, it fails.
In the setup process for using SnapView, which step did the customer forget to do?
A.Allocate LUNs to the Reserved LUN Pool
B.Allocate Write Intent Log
C.Enable Incremental Synchronization
D.Test IP link latency
Answer: A

EMC examen   E20-822   E20-822 examen   E20-822

NO.14 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D

certification EMC   certification E20-822   E20-822   certification E20-822   E20-822

NO.15 A customer is reporting a problem with a physical disk. Examining the SP Event Log shows errors for
LUN 16. Data is being gathered from a UNIX host used for storage management. The host does not have
the capability to run the Navisphere Web UI.
To determine the underlying disk structure, which Navisphere Secure CLI subcommand can be used to
determine if LUN 16 is being affected?
A.getdisk
B.getinfo
C.getlun
D.getrg
Answer: C

EMC   certification E20-822   E20-822

NO.16 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B

EMC examen   E20-822   E20-822 examen   E20-822   E20-822

NO.17 A large financial customer has a time-critical OLTP application running on a dedicated CX3-80. One of
their internal administrators believes they modified something that could have affected the production
LUN. Since then the response time has increased significantly.
What action is the likely cause of the problem?
A.Decreased the high watermark to 75%
B.Enabled auto-assignment
C.Increased queue depth to 128
D.Increased the cache write aside value to 3076
Answer: C

EMC examen   certification E20-822   certification E20-822

NO.18 A company has implemented Replication Manager to back up their SQL Server. In addition to clone
copies every 6 hours, they have also implemented SQL Server log backups for a more granular RPO.
Last night, a junior DBA corrupted the production database. After using Replication Manager to restore
the database with no recovery, the senior DBA attempts to replay the transaction log backups but the
database returns an error indicating that no database is in a state to replay logs.
What is the cause of this restore failure?
A.Replication Manager only supports transaction log replay on databases restored with full recovery
B.rmsqlrestore.exe was not used to replay the VDI metadata
C.The restored database's SCN is out of sync with the SQL system databases
D.The transaction log backups have a gap in the sequence of transactions
Answer: B

EMC   E20-822   E20-822 examen   E20-822

NO.19 A customer was running a snapshot session when they noticed a SP failure. The Source LUN was
owned by the failed SP. What will happen to the session and the Reserved LUN Pool (RLP) LUN?
A.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN must be
manually trespassed to the original owning SP.
B.Session continues and the RLP LUNs trespass. After repairing the failed SP, the RLP LUN trespasses
back to the original owning SP.
C.Session gets deactivated and the SP frees the allocated LUN. After fixing the failed SP, the session will
activate and the original RLP LUN will be allocated.
D.Session stops and a new RLP LUN will be allocated on the surviving SP upon fixing the failed SP. The
RLP LUN will trespass back to the original SP and the user must manually restart the session.
Answer: B

EMC   certification E20-822   certification E20-822

NO.20 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D

EMC   E20-822   E20-822

NO.21 A company has requested an independent consultant to develop and implement a security model for
the CLARiiON storage platform. The company has limited access to the administrator role by removing
rights for all accounts. However, they would like to keep the single administrator role account for top level
management.
Management of user security should not be done by the administrator role user. In addition, the storage
object administrators should not be able to change user security when using the Secure CLI. CLARiiON
storage systems are located in a protected data center with limited physical access.
Which method should be employed to manage user security?
A.Create a Security Administrator role user and create a Manager role user account for storage object
managers.
B.Create a Security Administrator role user, enable the CLI filter, and create a Manager role user account
for storage object managers.
C.Implement security using PKI certificates, create a Security Administrator role user, and enable the CLI
filter.
D.Implement security using PKI certificates, enable the CLI filter, and create a Manager role user account
for storage object managers.
Answer: B

certification EMC   E20-822 examen   E20-822 examen   E20-822

NO.22 A customer created two RAID groups, 0 and 2, with the default settings on their CX3-80 and bound
four LUNs in each group. After starting the application the customer notices all I/O is going through SP B.
What caused the LUN imbalance?
A.CX3-80 has a single SP
B.Default setting bound all LUNs on the same SP
C.Host does not have failover software installed
D.Host is not ALUA-aware
Answer: B

EMC   E20-822   E20-822 examen

NO.23 Click the Exhibit button.
While performing a routine check of a CX3-40 with FLARE R26 the storage administrator receives an
error while trying to clear the logs. What is the cause of the error?
A.Host agent is not running
B.The Privileged User List is empty
C.The user is logged in as a security administrator role
D.The user is logged in with a manager role
Answer: D

certification EMC   E20-822 examen   certification E20-822

NO.24 A customer has recently upgraded their CLARiiON to FLARE R26. What software and configuration
changes must the storage administrator ensure are in place to take advantage of the Asymmetric
Active/Active features of the software?
A.PowerPath 5.0; and change all initiators to use Failover mode 2
B.PowerPath 5.0; disable ArrayCommPath, and change all initiators to use Failover mode 4
C.PowerPath 5.1; and change all initiators to use Failover mode 4
D.PowerPath 5.1; disable Array CommPath, and change all host initiators to use Failover mode 3
Answer: C

EMC   E20-822 examen   certification E20-822   E20-822   E20-822   E20-822

NO.25 A customer is currently using Replication Manager to create clone copies of their SQL Server instance
which are then mounted to a backup server and streamed to tape. The customer has decided to purchase
a second CLARiiON and implement a DR scenario. The DR site is located 30 km away. A dedicated T1
(1.5 Mb) line is leased specifically for DR purposes with measured latencies that average 5-10 ms.
The application is considered mission-critical and as such very little data loss is acceptable. Any solution
implemented must have very little impact on performance. Time will be allowed for the application to be
recovered in the case of a disaster. The implemented solution must also allow for transaction logs to be
replayed in the case of data corruption.
Which DR solution would best fit this scenario?
A.MirrorView/A
B.RepliStor SQL Server Module
C.SQL Log Shipping/Full SAN Copy from the production LUN
D.SQL Log Shipping/Incremental SAN Copy from the production LUN
Answer: C

certification EMC   E20-822   E20-822

NO.26 A customer is implementing the Replication Manager/SAN Copy/RepliStor solution for DR of their
Exchange environment. In the process of configuring this solution they need to configure the RM DR
utility to run after the completion of the SAN Copy job.
Which level of IR callout should they use in order for the script to invoke at the proper time?
A.100
B.300
C.400
D.600
Answer: D

EMC   E20-822 examen   E20-822   certification E20-822   E20-822   certification E20-822

NO.27 Click the Exhibit button.
A customer wants to create an additional 250 GB LUN on their existing RAID 6 group. How can this be
accomplished?
A.Create the LUN on another RAID 6 group using concatenation
B.Defragment the RAID group and bind the additional LUN
C.Destroy the RAID group and create the new LUNs
D.Expand the RAID group to increase the available space
Answer: A

EMC   certification E20-822   E20-822   E20-822 examen

NO.28 Click the Exhibit button.
You are the SAN Administrator at a company. The company is running multiple Exchange Server 2007
storage groups on a CLARiiON array that exclusively uses 15k rpm 146 GB drives. You have been tasked
with adding a third Exchange storage group with one mailbox store to the existing server.
The storage for this new Exchange storage group must be allocated from the same CLARiiON currently
running the other two Exchange storage groups. All Exchange storage groups are presently exhibiting a
1:1 read/write ratio. The new storage group will require capacity identical to the existing Exchange
storage groups.
The table below, as well as the exhibit, indicates the current utilization of the array.w`V6a2tYJ%&,*In
order to satisfy the capacity requirements (GB and IOPS), in which RAID group must you create a
database LUN for the new Exchange storage group?
A.0
B.10
C.20
D.30b
Answer: C

EMC examen   E20-822 examen   E20-822   E20-822

NO.29 Click the Exhibit button.
Based on the exhibit, what happened between 05:21 A.M. and 06:56 A.M.?
A.CLARiiON back-end port was disconnected
B.CLARiiON front-end port was disconnected
C.MirrorView connection failed
D.SAN Copy connection failed
Answer: C

EMC examen   certification E20-822   E20-822

NO.30 A new CLARiiON arrives at a customer's site and an EMC Customer Engineer performs the physical
installation. The storage administrator is under a lot of pressure to have the array online and in production
by the end of the week. The storage administrator selects several Windows and Solaris servers for the
initial production rollout. The storage requirements have been agreed upon and the storage administrator
creates 30 LUNs of various sizes based upon EMC best practices.
The administrator works with the server team to install HBAs, update settings, install EMC software, and
then perform the necessary cabling and zoning requirements. After the hosts successfully register with
the CLARiiON array, the Windows and Solaris administrators state each server has 30 LUNs allocated.
What does the storage administrator need to accomplish to ensure each server has access to the
appropriate LUNs?
A.Create the appropriate storage groups
B.Disable Access Logix
C.Enable Access Logix
D.Fix the incorrect zones
Answer: C

EMC   E20-822   certification E20-822