Si vous êtes intéressé par l'outil formation Dell DC0-200 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.
Pass4Test est un catalyseur de votre succès de test Dell DC0-200. En visant la Certification de Dell, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Dell DC0-200, la Q&A Dell DC0-200 est un bon choix pour vous.
Code d'Examen: DC0-200
Nom d'Examen: Dell (Certified Server Professional Exam)
Questions et réponses: 120 Q&As
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Dell DC0-200 est une bonne examination. Mais c'est difficile à passer le test Dell DC0-200. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Pass4Test possède un l'outil de formation particulier à propos de test Dell DC0-200. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Dell DC0-200 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
DC0-200 Démo gratuit à télécharger: http://www.pass4test.fr/DC0-200.html
NO.1 What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
A. You specify which adaptor will take the entire load. The other NICs will be used only when the
Preferred Primary fails.
B. You specify the desired card for all outgoing traffic for the team. The other members will still accept
incoming packets.
C. You specify the desired card for all incoming traffic for the team. The other members will still transmit
outgoing packets.
D. You specify which adaptor will take the load until it is saturated, then the other members will start
accepting packets until the Preferred Primary is just below the saturation point.
Answer: A
Dell DC0-200 DC0-200 examen DC0-200 certification DC0-200 DC0-200
NO.2 Which two operations can be performed with the DSA CD? (Choose two.)
A. run system diagnostics on your server
B. create Windows 2000 driver/utilities diskette(s)
C. create NetWare 5.1/6.0 driver/utilities diskette(s)
D. change the Dell Service Tag via the Service Tag Utility
Answer: BC
Dell examen DC0-200 DC0-200 examen
NO.3 Which tool can be used to create a Utility Partition?
A. DOS fdisk Utility
B. Dell Server Assistant CD
C. Dell OpenManage Array Manager
D. Dell OpenManage IT Assistant CD
Answer: B
Dell DC0-200 DC0-200 examen DC0-200 examen DC0-200
NO.4 Which benefit does Link Aggregation provide, as used by Intel NICs in PowerEdge servers?
A. provides load-balanced fault tolerance to the network
B. assures that if one adapter fails, the server remains available to the network
C. combines multiple adapters into one channel, providing greater bandwidth for network traffic
D. allows multiple adapters to share the network load, preventing one adapter from being overloaded
Answer: C
Dell DC0-200 examen certification DC0-200
NO.5 Which two features are found on both 24U and 42U Dell racks? (Choose two.)
A. split rear door for cable access
B. diagnostic LCD panel on the front door
C. integrated redundant 1000 watt power supplies
D. 0U space that can be used for components other than servers and storage
Answer: AD
Dell certification DC0-200 DC0-200 examen certification DC0-200 DC0-200
NO.6 You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
A. system setup
B. PERC BIOS
C. CERC BIOS
D. Array Manager
Answer: B
Dell examen certification DC0-200 DC0-200 DC0-200 DC0-200 examen
NO.7 You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices
using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
A. boot to the Dell Server Assistant CD after installing Windows 2000
B. autorun the CD from the Windows desktop after installing Windows 2000
C. boot to the Dell Server Assistant CD and have your Windows CD available
D. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility
Partition
Answer: C
Dell examen DC0-200 DC0-200 certification DC0-200 DC0-200 certification DC0-200
NO.8 What is the default path and name of the logging file if the Message Logging option is selected when
running diagnostics?
A. A: RESULT.txt
B. C: RESULTS.txt
C. C: DELLTEST.txt
D. A: DELLTESTS.txt
Answer: A
certification Dell certification DC0-200 DC0-200 certification DC0-200
NO.9 What is the intended mounting location for a 0U rack mount device in a Dell rack?
A. at the top of the rack
B. on the back doors of the rack
C. in any of the 42U spaces available
D. in the mounting holes in the side walls of the rack
Answer: D
Dell DC0-200 DC0-200 examen DC0-200
NO.10 What is the correct NIC teaming for the Intel Proprietary Method to accomplish fault tolerance?
A. AFT
B. ALB
C. ATF
D. SLB
Answer: A
Dell DC0-200 examen DC0-200
NO.11 You have just installed W2K on your server and you cannot get the server to see your local network.
What can you do to diagnose network connectivity? (Choose three.)
A. verify that the server is configured to use DNS
B. verify that the cable plugged into your server is not a cross-over cable
C. verify that the subnet address is the same as the rest of the working devices on your LAN
D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: BCD
Dell DC0-200 DC0-200 examen DC0-200 DC0-200
NO.12 You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed
and you do not know what network adapters are in the system. Without physically opening the chassis,
what are two ways to see which network adapters are installed using the operating system? (Choose
two.)
A. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be
named
B. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will
be named
C. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and
view installed adapters
D. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view
protocol-bound adapters
Answer: BC
certification Dell certification DC0-200 DC0-200
NO.13 Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
A. set the media type for the adapters
B. create a team and assign it a name
C. select the adapters from the list to add to the team
D. select the Broadcom Advanced Server Program Driver
E. configure the IP address and subnet mask for the team F. enter the path and filename of the
configuration to be saved
Answer: BCDE
Dell examen DC0-200 DC0-200 examen DC0-200 DC0-200
NO.14 Which two components can be installed in the 0U space found in Dell racks? (Choose two .)
A. Dell UPS
B. Dell PDU
C. Dell flat panel monitor
D. Dell Dual-Power Grid Switch
Answer: BD
Dell DC0-200 examen DC0-200 certification DC0-200 DC0-200
NO.15 Which three hard drive partitions must be defined during the automated Linux installation process?
(Choose three.)
A. root
B. logs
C. boot
D. data
E. swap
Answer: ACE
certification Dell certification DC0-200 certification DC0-200 DC0-200 examen DC0-200 certification DC0-200
NO.16 You are about to begin the installation of Windows 2000 Server on your PowerEdge server . As you
inspect the System Setup Utility, you notice that the Asset Tag field is blank. What are two ways you can
add the correct asset tag into the BIOS? (Choose two.)
A. Flashing the ESM to the latest revision automatically updates the Asset Tag field.
B. Flashing the BIOS to the latest revision automatically updates the Asset Tag field.
C. You create the Asset Tag Utility Diskette from the DSA CD and use it to update the Asset Tag field.
D. You download the Asset Tag Utility from premiersupport.dell.com and use it to update the Asset Tag
Field.
E. After installing Windows 2000, you use the Asset Manager application from the Dell group in control
panel to update the Asset Tag field.
Answer: CD
Dell DC0-200 examen DC0-200 examen DC0-200
NO.17 You need to install Intel NIC teaming for Windows 2000 and you do not have access to the Internet.
From what two sources can you obtain the PROSet software? (Choose two.)
A. Intel Network Drivers CD
B. Dell Server Assistant (DSA)
C. Dell Network Applications CD
D. Windows 2000 Installation CD
Answer: AB
Dell certification DC0-200 DC0-200 DC0-200 DC0-200
NO.18 Which statement is true about using the Save feature of BASP?
A. It is only available in Windows 2000.
B. It saves a configuration as an executable file.
C. It lets you transfer teaming configurations to other servers.
D. It is used to install and configure the Broadcom Ethernet Controller driver.
Answer: C
Dell DC0-200 examen DC0-200 certification DC0-200
NO.19 How many PowerEdge 1650 servers can be installed in a Dell 42U rack that already has two
PowerEdge 2650 servers, a PowerEdge 6650 server, and a 1U keyboard and monitor drawer?
A. 31
B. 32
C. 33
D. 34
Answer: C
certification Dell DC0-200 DC0-200 certification DC0-200 DC0-200
NO.20 Which three statements are true about installing the Intel drivers and utilities that allow teaming in
Windows 2000? (Choose three .)
A. You must install the ProSet Utility.
B. You must install the Intel driver using floppy diskettes.
C. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel
Network Drivers CD.
E. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel
ProSet Utility CD.
Answer: ACD
Dell DC0-200 examen DC0-200
Pass4Test est un bon site d'offrir la facilité aux candidats de test Dell DC0-200. Selon les anciens test, l'outil de formation Dell DC0-200 est bien proche de test réel.
没有评论:
发表评论