Pass4Test offre de Lotus 190-981 matériaux d'essai

Le test de Certification Lotus 190-981 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Lotus 190-981, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Code d'Examen: 190-981
Nom d'Examen: Lotus (IBM Lotus Notes Domino 8.5 Building the Infrastructure)
Questions et réponses: 130 Q&As

Selon les anciens test Lotus 190-981, la Q&A offerte par Pass4Test est bien liée avec le test réel.

Le test simulation Lotus 190-981 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Lotus 190-981 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

190-981 Démo gratuit à télécharger: http://www.pass4test.fr/190-981.html

NO.1 Kyle, the Domino administrator, needs to connect to the Domino Controller through a firewall. What
program must be configured properly for this functionality?
A.Binder service
B.Service binder
C.Bind controller
D.Controller binder
Answer: B

Lotus   190-981   190-981

NO.2 What action does a stop trigger perform?
A.Shuts down a task if a threshhold is reached.
B.Notifies an administrator if an event happens.
C.Pauses the Domino console when a particular event occurs.
D.Automatically restarts the server according to predefined criteria.
Answer: C

Lotus   190-981   certification 190-981   190-981   190-981

NO.3 In which of the following scenarios would the Notes client push an updated copy of their user id file to
the server ID vault?
A.When the user changes home servers
B.When the user adds an Internet certificate
C.When the user changes the logoff timeout on their Notes client
D.When the user accepts a cross certificate to another Notes domain
Answer: B

Lotus examen   190-981 examen   190-981 examen   190-981   190-981

NO.4 Which one of the following happens when the purge interval is shorter than the replication interval?
A.The view indexes may not refresh after a replication.
B.The database will force an unscheduled replication to occur.
C.Documents deleted from a replica of the database can reappear.
D.Users may not see the newest documents when they open a database
Answer: D

Lotus   190-981 examen   certification 190-981

NO.5 You are configuring Directory Assistance to utilize replicas of databases across numerous servers.
However, you wish for the first lookup to be done locally for a replica. What should be placed in the Server
Name field of the Directory Assistance document?
A.*
B.Local
C.Notes
D.Primary
Answer: A

Lotus   190-981 examen   190-981   190-981   certification 190-981

NO.6 Which of the following are the default names for the DB2 instance, database and schema?
A.DB2, Domino, Domino
B.NSF, Domino, DomDB2
C.Domino, NSFDB2, NDDB2
D.SYSCTR, Domino, DB2AccServ
Answer: A

certification Lotus   190-981 examen   190-981   190-981   190-981

NO.7 Users in your organization utilize Lotus Traveler for their mobile devices. They are successfully able to
search for user names and telephone numbers. What is the default amount of returned results in their
searches?
A.10
B.25
C.50
D.100
Answer: B

Lotus   190-981 examen   190-981   certification 190-981

NO.8 Brie left the Create New Replicas field blank on a server document. Who can create new replica
databases on that server?
A.No one
B.Administrators
C.LocalDomainServers
D.Everyone in the domain
Answer: A

Lotus examen   190-981 examen   190-981   190-981 examen   190-981   190-981 examen

NO.9 Domino Domain Monitoring (DDM) enhanced events contains which of the following?
A.Specific target information only
B.Events generated by an event probe only
C.Events generated by an event generator only
D.All of the above
Answer: D

Lotus   190-981 examen   190-981   190-981   190-981 examen   190-981 examen

NO.10 The Cluster Database Directory Manager creates which of the following databases?
A.CLDBDIR.NSF
B.CLUSTERDB.NSF
C.CLUDIRMGR.NSF
D.CLUDIRECTORY.NSF
Answer: A

Lotus   190-981   190-981   190-981   certification 190-981

NO.11 Which one of the following server console commands should be utilized to clear the database cache?
A.DBCache Flush
B.DBCache Clear
C.Database Flush
D.Database Clear Cache
Answer: A

Lotus examen   190-981 examen   190-981 examen   190-981 examen   190-981   certification 190-981

NO.12 What type of information is stored in an .NSD file?
A.Current server status
B.Notes storage directories
C.Information regarding a system crash
D.HTTP access information for the server
Answer: C

Lotus   certification 190-981   190-981 examen   certification 190-981

NO.13 Your company has been utilizing the ID vault and regularly marking IDs as inactive when a user
leaves the company. In this instance, a user has returned to the company. Which of the following steps
represent the best option for this returning user?
A.Choose to restore the id in the vault as active again
B.When registering the user, add the new id to the vault
C.Have the user email their id file back to the vault to reactivate
D.Have the user authenticate via the web interface to activate their old id file
Answer: A

Lotus   certification 190-981   190-981   190-981 examen

NO.14 Marcus, the Domino administrator, wishes to modify the reverse path setting on forwarded messages
sent by user mail rules. Which of the following settings would allow the message to possibly bypass spam
filters while not providing a valid email address?
A.Set reverse-path to null
B.Preserve existing value
C.Use recipient Internet address
D.Construct nondeliverable return address
Answer: D

Lotus   certification 190-981   190-981

NO.15 Which one of the following database elements is not updated when the DESIGN task is run?
A.Forms
B.Views
C.Roles
D.Agents
Answer: C

certification Lotus   190-981 examen   190-981   190-981   certification 190-981

NO.16 Karen, the Domino administrator, is configuring client authentication through Directory Assistance. She
wishes to restrict lookups to a specific directory to ONLY users in the Europe/WXYZ hierarchy. Which of
the following represents the proper trusted rule to be created in Directory Assistance?
A./ / / /WXYZ/*
B./ / /Europe/WXYZ/*
C./ / */Europe/WXYZ/*
D.*/*/*/Europe/WXYZ/*
Answer: B

Lotus   190-981   190-981 examen

NO.17 A server was given Editor access to an application. Which one of the following describes how this
server fits into the design distribution process for this application?
A.It can send design changes only.
B.It can receive design changes only.
C.It can both send and receive design changes.
D.It can neither send nor receive design changes.
Answer: B

certification Lotus   certification 190-981   certification 190-981

NO.18 Which one of the following statements regarding the Certificate Authority (CA) is true?
A.The CA issues Lotus Notes certificates only.
B.The CA issues Internet certificates only.
C.Access to the certifier ID must be granted.
D.The CA issues both Lotus Notes and Internet certificates.
Answer: D

Lotus examen   190-981 examen   190-981 examen   190-981   190-981

NO.19 The previous internal Domino time is saved in Last_Domino_Time when the Domino server shuts down,
when the server is successfully restarted and when the OS time refreshes the internal Domino time.
Which of the following prevents Domino from starting if the time change has moved beyond a preset
range?
A.Rematch_OS_Time
B.Reset_Actual_Time
C.Restart_Time_Action
D.Restart_Time_Interval
Answer: D

Lotus examen   certification 190-981   190-981

NO.20 Domino Domain Monitoring (DDM) contains how many classes of event information?
A.One
B.Two
C.Three
D.Four
Answer: B

Lotus   190-981 examen   190-981   190-981 examen

NO.21 The Domino Console connects to the Controller over what default port?
A.80
B.1352
C.1533
D.2055
Answer: D

certification Lotus   190-981 examen   190-981   190-981   190-981

NO.22 Edison, the Domino Administrator, wants to enforce file security on HTML and Image files. Which one
of the following should he do?
A.Enforce ECLs
B.Create File Protection documents
C.Use Protect Directories in the HTTPD.CNF files
D.Domino does not allow security enforcement on HTML and Image files
Answer: B

Lotus   certification 190-981   190-981 examen   190-981

NO.23 ServerA/Singapore/Acme is being accessed by both Web and Notes clients:
1. Web clients are in the Web Users group.
2. Notes clients are in the Corporate Users group.
Which one of the following should Hans, a Domino administrator, do to ensure that only Web users
access ServerA/Singapore/Acme?
A.Recertify ServerA/Singapore/Acme using a different OU certifier.
B.Change the Access server field in the Server document to remove Corporate Users.
C.Remove all Person documents from the Domino Directory on ServerA/Singapore/Acme.
D.Change the Not access server field in the Server document to remove Corporate Users.
Answer: B

certification Lotus   190-981   190-981

NO.24 Database1.nsf needs to replicate between two servers.
ServerX should only be able to add and modify information in ServerZ's replica copy of Database1.nsf.
ServerZ should be able to pull new and modified information from ServerX's replica copy of
Database1.nsf, but not be able to write new or modified information to ServerX's copy.
Which one of the following represents the access levels each server should have?
A.ServerX should have Author access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
B.ServerX should have Manager access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
C.ServerX should have Editor access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
D.ServerX should have Editor access to Database1.nsf on ServerB, and ServerZ should have Depositor
access to DAtabase1.nsf on ServerX
Answer: C

Lotus   190-981   certification 190-981   certification 190-981

NO.25 Roxana issued the command SET SECURE NOONE at the server console. What did this
accomplish?
A.Locked the web console to browser users
B.Prevented anyone from accessing the server console
C.Prevented anyone other than himself from using the console
D.Forced anyone using the console to type in the password NOONE to have access to the console
Answer: D

Lotus   190-981   190-981   190-981 examen   190-981

NO.26 William wishes to migrate his company's Notes certifier to the new Certificate Authority process. He
has chosen to encrypt the certifier id with a lock id. What Domino server console command must be
issued next?
A.load unlock ca
B.load ca unlock
C.tell ca activate
D.tell ca unlock
Answer: D

Lotus   certification 190-981   190-981 examen

NO.27 Event handlers contain numerous notification methods. Which of the following is NOT a supported
notification method?
A.Pager
B.Broadcast
C.Outbound phone call
D.Log to Windows NT Event Viewer
Answer: C

Lotus   certification 190-981   190-981   190-981

NO.28 When calculating the size of a mail file to determine whether it conforms to configured mail quota or
warning threshold limits, Domino treats attachments stored using the Domino Attachment and Object
Service as which of the following?
A.As though each user does not have a quota
B.As though each user owned the entirety of the attachment file
C.As though each user owns only the size of the message without the attachment
D.as though each user cannot exceed warning threshold limits for their mailfile
Answer: B

Lotus   190-981   190-981 examen   190-981   190-981

NO.29 Marilyn wants to view the expired certificates in the Certification Revocation List (CRL). In which one
of the following would Marilyn find this information?
A.This information cannot be viewed.
B.In the CRL document in the Domino Directory.
C.In the Certifier document in the Domino Directory.
D.In the Server document in the Domino Directory.
Answer: C

Lotus   certification 190-981   certification 190-981   190-981 examen   190-981

NO.30 When an S/MIME signed message has a disclaimer added by the server and is received by a Notes
user, which of the following is the result?
A.The signature cannot be verified
B.The signature is stripped from the message
C.The message cannot be read by the recipient
D.The message cannot be transmitted and is returned to the user
Answer: A

Lotus   190-981 examen   190-981   190-981   certification 190-981

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Lotus 190-981 très tôt. Pass4Test peut vous permettre à réussir 100% le test Lotus 190-981, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

Guide de formation plus récente de Lotus 190-803

Le test Lotus 190-803 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Lotus 190-803 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Lotus 190-803.

Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Lotus 190-803 par une seule fois, vous n'aurez pas aucune raison à refuser.

Code d'Examen: 190-803
Nom d'Examen: Lotus (Using LotusScript in IBM Lotus Domino 8 Applications)
Questions et réponses: 90 Q&As

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Lotus 190-803 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Lotus 190-803. Ajoutez la Q&A au panier.

190-803 Démo gratuit à télécharger: http://www.pass4test.fr/190-803.html

NO.1 Neala is using a hidden field on the Request form to store a temporary value for the request status.
Since this field will not be stored, Neala has created it as a Computed for display field. Neala is trying to
use the code below to set the tempStatus field to "Draft" when a new document is created with the
Request form. An error message displays whever a new Request is created. What could be the problem?
Sub Postopen(Source As Notesuidocument) If Source.IsNewDoc Then Call
Source.FieldSetText( "tempStatus", "Draft" ) End If End Sub
A.In order for the FieldSetText method to be used, a field must be editable. Hidden fields are not editable.
B.The Postopen event occurs before the user has input focus, so only back-end methods will work from
this event.
C.In order for the FieldSetText method to be used, a field must be editable. Computed for display fields
are not editable.
D.The Postopen event occurs after the document has opened, but Computed for display fields are not
available for manipulation until after the user has input focus.
Answer:C

Lotus   190-803 examen   certification 190-803   190-803

NO.2 Will is creating an archive script which will copy the document object (doc) from the current database
to an Archive database. The name of the archive database is ARCHIVE.NSF and it resides on the
Dunn_Hub/Dunn server. So far, the code he has written is: Dim s As New NotesSession Dim db As
NotesDatabase Set db=s.CurrentDatabase Dim adb As New
NotesDatabase("Dunn_Hub/Dunn","ARCHIVE.NSF") Dim doc As NotesDocument Dim col As
NotesDocumentCollection Set col=db.UnprocessedDocuments Set doc=col.GetFirstDocument do until
doc is nothing ======>MISSING LINE Set doc=col.GetNextDocument(doc) loop Which one of the
following lines of code should be placed on the MISSING LINE to copy the document to the Archive
database?
A.doc.CopyAllItems(doc)
B.doc.CopyToDatabase db
C.doc.CopyToDatabase col
D.doc.CopyToDatabase adb
Answer:D

Lotus   190-803   190-803   190-803   certification 190-803

NO.3 The Salary form needs an AuditHistory field. When documents are changed, Sahir's script must record
the date/time, editor's name, and values of all changed fields before and after the change. The solution
must also be usable in other forms, and must work without modification, even if new fields are added to
the forms. How can Sahir do this?
A.Write Entering event code for each field, recording field values. Write Exiting events to update
AuditHistory if the values change.
B.Write Postopen event code to populate a list with item names and item values as the document is
opened. Write Querysave event code to examine current item values, and update AuditHistory for any
changed items.
C.Write onFocus event code to populate a hidden temporary field with the item values. Write onChange
event code to update the AuditHistory if the field is changed.
D.Write onLoad event code to populate a list with item names and item values as the document is opened.
In the form onExit event, write code to examine current item values and update AuditHistory for any items
that have changed.
Answer:B

certification Lotus   190-803 examen   190-803   190-803 examen   190-803 examen

NO.4 The NotesStream class is used to read and write which of the following?
A.Files
B.Network sockets
C.Domino server console commands
D.Binary data in NotesRichText fields (like attachments and inline images)
Answer:A

Lotus examen   190-803 examen   190-803   190-803

NO.5 Avery has been asked to write a web service in his Domino application. The web service will allow an
Oracle application to query the Movie Rental database with a member identification number and receive a
list of all movies the member has rented in the last 30 days. What are the language options available to
Avery for writing this web service?
A.LotusScript and Java
B.LotusScript, but not Java
C.Java, but not LotusScript
D.LotusScript, Java, and @Formula
Answer:A

certification Lotus   190-803   certification 190-803   190-803

NO.6 Suzanne has built a view of all movie rentals sorted by Checkout Status. The possible values for
CheckoutStatus are "Available", "Checked Out", "Overdue", and "Overdue With Exceptions". None of
these categories is empty. Suzanne is writing an agent to retrieve all of the rental documents that have a
CheckoutStatus of "Overdue", and send out emails informing the renters of this status. What NotesView
method will build a collection of only the documents with a status of "Overdue"?
A.GetAllDocumentsByKey("Overdue")
B.GetDocumentsByKey("Overdue", True)
C.GetAllDocumentsByKey("Overdue", True)
D.GetAllDocumentsByKey("Overdue", False)
Answer:C

Lotus   190-803   190-803

NO.7 Aitana is working in the company's Inventory database. She wants to create an array called 'Assembly'
that will be used to reference 10 instances of the Part class. Aitana can create a single instance of the
Part class using code like this: Dim myPart As New Part But she is having a problem creating the
'Assembly' array. What is wrong with the following line of code: Dim Assembly(9) As New Part
A.The New keyword cannot be used to declare an array of object reference variables.
B.'Assembly' is a reserved word in LotusScript, and cannot be used as a variable name.
C.If an array declared as Assembly(9) is to hold 10 elements, Option Base 0 must be used.
D.An array cannot be used to hold multiple Class instances.
Answer:A

Lotus   190-803   190-803

NO.8 LS2J is a technology that allows you to access Java classes and libraries directly from LotusScript.
Part of this technology is that certain Java data types are mapped directly to LotusScript data types. What
does a Java String map to in LotusScript?
A.String
B.JavaString
C.Array of Bytes
D.Array of Strings
Answer:A

Lotus examen   190-803 examen   190-803   190-803

NO.9 Given the following piece of code, where "doc" is a NotesDocument: fieldValue =
doc.GetItemValue("Title") Print "This document's title is " & fieldValue(0) Which of the following is a correct
example of using the "Extended class" syntax to replace the example code above?
A.Print "This document's title is " & doc.Title
B.Print "This document's title is " & doc.Title(0)
C.Print "This document's title is " & doc.GetField.Title
D.Print "This document's title is " & doc.GetField.Title(0)
Answer:B

Lotus   190-803   190-803   190-803   190-803 examen

NO.10 Vicki has been asked to integrate device data from her company's network monitoring utilities into
Notes documents. The utilities produce data in an XML format. What strategy can Vicki use in her
LotusScript agent to parse the data for import into Notes?
A.Read the data using a NotesStream object,. Parse the XML data using classes derived from the
NotesXMLProcessor class.
B.Rename the XML file using an extension of ".dxl". Read and parse the data using methods of the
NotesDXLImporter class.
C.Rename the XML file using an extension of ".dxl". Insert a DOCTYPE definition pointing to:
'c:\notes\data\xmlschemas/domino_8_0.dtd' Read and parse the data using methods of the
NotesDXLImporter class.
D.LotusScript includes methods to parse the specific DXL format. Since this file is a more generic XML
format, Vicki will need to use a tool such as Excel to convert the XML to a format that can be processed
with COM classes.
Answer:A

certification Lotus   certification 190-803   certification 190-803   190-803

NO.11 For agents that run on new and modified documents, newly received mail documents, pasted
documents, or newly modified documents, what method can you use to mark each document as
"processed" to ensure that a document gets processed by the agent only once (unless it's modified,
mailed, or pasted again)?
A.NotesView.UpdateAll
B.NotesDocument.SetProcessed
C.NotesDocumentCollection.Stamp
D.NotesSession.UpdateProcessedDoc
Answer:D

certification Lotus   190-803 examen   190-803

NO.12 Devin's canonical Notes name is CN=Devin Smith/OU=Accounting/O=ACME. When he clicks an
action button in an email he received, a messagebox appears which includes this text: Devin Smith is
running Notes 7.0 What is the underlying code that produces this message?
A.Dim session As New NotesSession Messagebox session.UserName + " is running " +
session.NotesVersion
B.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesVersion
C.Dim session As New NotesSession Messagebox session.CommonUserName + " is running " +
session.NotesBuildVersion
D.Dim session As New NotesSession Dim db As NotesDatabase Set db = session.CurrentDatabase
Messagebox db.CommonUserName + " is running " + db.NotesVersion
Answer:B

Lotus   certification 190-803   190-803   190-803 examen

NO.13 Victor is creating a script that will generate multiple values to be put into a single field. Which one of the
following strategies should he follow?
A.Define the field on the form to be multivalue.
B.Create a scalar identifier, and use a loop which writes the identifier's value to the field.
C.Create a string identifier which separates values with a carriage return, and write the identifier to the
field.
D.Create an array to contain the values, and assign the array to the item in the document using the
extended class syntax
Answer:D

Lotus   certification 190-803   190-803   certification 190-803

NO.14 Chris has imported a number of documents into a Notes database that contain MIME data. He now
needs to write an agent that will display the type of MIME encoding for the data. What code fragment
below will get the MIME entry and display the encoding type?
A.Set mime = doc.GetAllMIMEEntries Messagebox "Encoding type: " + mime.Encoding
B.Set mime = doc.GetMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
C.Set mime = doc.GetFirstItem(mime) Messagebox "Encoding type: " + mime.Encoding
D.Set mime = doc.GetFirstMIMEEntry Messagebox "Encoding type: " + Cstr(mime.Encoding)
Answer:B

certification Lotus   190-803   certification 190-803   190-803

NO.15 The error message "Error loading USE or USELSX module" can be caused by which of the following?
A.An improperly defined Const value
B.An ODBC connection that cannot be made
C.An attempt to use NotesUIWorkspace in a background scheduled agent
D.A script library that can't be found or needs to be recompiled using "Recompile All LotusScript"
Answer:D

Lotus   certification 190-803   190-803   190-803   190-803 examen

NO.16 Ichiro needs to write an agent to read a comma-delimited ASCII file of data about parts that his
company uses when building computers. The data is from one of the parts suppliers, and includes 10
fields in each record. Ichiro needs to extract the Part Number, Part Description, and Price from each input
record and update his company's Inventory database with the current data. How should Ichiro proceed?
A.Create a user-defined data Type to represent a Part. Write a 'getter' method for each of the 3 fields that
need to be accessed from the data Type.
B.Create a user-defined class to represent the ASCII file. Write a 'getter' method to retrieve each record,
and use the NotesStream.SplitText method to extract the fields.
C.Create a user-defined class to represent the Parts data. Use notesDOMTextNode.SplitText( "," ) to
parse each field into the appropriate member variable.
D.Create a user-defined data Type to represent the structure of the Parts data. Each field of a given input
record can be referenced using the appropriate member variable.
Answer:D

Lotus examen   certification 190-803   190-803   certification 190-803

NO.17 Which of the following methods will always return a collection of documents that are in the SAME order
that they appear in the view.
A.NotesView.Search
B.NotesView.GetCategory
C.NotesView.GetAllEntriesByKey
D.NotesView.GetAllDocumentsByKey
Answer:C

Lotus   190-803 examen   190-803

NO.18 Pitr has a Notes Rich Text field on his Account Overview document that contains formatted text,
attachments, and images. He would like to use the textual information in that field in a view. What
NotesRichTextItem method could Pitr use to create a new field containing only the text information of the
original field?
A.TextOnly
B.ConvertToText
C.GetUnformattedText
D.RemoveEmbeddedObjects
Answer:C

certification Lotus   190-803   190-803   certification 190-803   certification 190-803

NO.19 Marvin wants to export a given Notes document to a DXL text file. How would he accomplish this task?
A.He would use the NotesXMLTransformer class to copy the document directly to a text file
B.He would use the ExportDXL method of the NotesDocument class to send the document to a
NotesStream that writes to a text file
C.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a NotesDXLOutput object that writes to a text file
D.He would create a NotesDXLExporter object, set the input to the Notes document in question, and set
the output to a string that indicates the path of the text file he wants to create.
Answer:D

certification Lotus   190-803   190-803 examen

NO.20 What does the following code do? Dim session As New NotesSession Dim location As String location
= session.GetEnvironmentString("ENVLoc")
A.Gets the value of the Notes.ini variable called "ENVLoc"
B.Gets the value of the Notes registry entry called "ENVLoc"
C.Gets the value of the Notes.ini variable called "$ENVLoc"
D.Gets the value of the DOS environment variable called "ENVLoc"
Answer:C

certification Lotus   190-803 examen   certification 190-803   190-803 examen

La Q&A Lotus 190-803 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Lotus 190-803.

Le matériel de formation de l'examen de meilleur Juniper JN0-120

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Juniper JN0-120. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Juniper JN0-120.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Juniper JN0-120 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Juniper JN0-120.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Juniper JN0-120.

Le programme de formation Juniper JN0-120 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Juniper JN0-120, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Juniper JN0-120 coûtant un peu d'argent.

Code d'Examen: JN0-120
Nom d'Examen: Juniper (Juniper networks Certified internet associate.e(jncia-e))
Questions et réponses: 120 Q&As

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Juniper JN0-120. Ajoutez la Q&A au panier.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

JN0-120 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-120.html

NO.1 Which service does the ERX Edge Router support with a virtual router?
A. voice over IP
B. wholesale services
C. IP quality of service
D. SNMP management
Answer: B

Juniper   JN0-120 examen   JN0-120 examen

NO.2 Which two forms of DSL connectivity provide the same bandwidth in both directions? (Choose two.)
A. ADSL
B. HDSL
C. SDSL
D. RADSL
Answer: B,C

certification Juniper   certification JN0-120   JN0-120

NO.3 What are two ways that IP datagrams are passed from the ingress line module to the egress line
module? (Choose two.)
A. over an ATM PVC
B. over a FastEthernet bus
C. over a Gigabit Ethernet bus
D. over high speed serial bus
Answer: A,D

certification Juniper   JN0-120   JN0-120 examen

NO.4 How are the slot groups arranged in the ERX 700 Series Edge Router?
A. Group 1 - Slots 0 &1 Group 2 - Slot 2 Group 3 - Slot 3 Group 4 - Slot 4
B. Group 1 - Slots 2 & 3 Group 2 - Slot 4 Group 3 - Slot 5 Group 4 - Slot 6
C. Group 1 - Slot 2 Group 2 - Slot 3 Group 3 - Slot 4 Group 4 - Slot 5 & 6
D. Group 1 - Slot 3 Group 2 - Slot 4 Group 3 - Slot 5 Group 4 - Slots 6 & 7
Answer: B

Juniper examen   JN0-120 examen   certification JN0-120

NO.5 Which command configures an ATM PVC in a Bridged 1483 network?
A. atm pvc 33 0 33 aal5snap
B. atm pvc 33 0 33 aal5bridge
C. atm pvc 33 0 33 bridge1483
D. atm pvc 33 0 33 1483bridge
Answer: A

Juniper   certification JN0-120   JN0-120   JN0-120   JN0-120

NO.6 A service provider is operating a Routed 1483 network where the ATM PVCs are treated as a large
subnet. What is a consequence of this configuration?
A. It burns up IP addresses.
B. It conserves IP addresses.
C. It results in a smaller routing table.
D. Each PVC has a separate /30 subnet.
Answer: B

certification Juniper   JN0-120 examen   JN0-120   certification JN0-120   JN0-120   JN0-120 examen

NO.7 By default, how does the router handle changes to its operational configuration?
A. Changes are not implemented, but are saved automatically.
B. Changes are not implemented and must be written into memory.
C. Changes are implemented immediately and saved automatically.
D. Changes are implemented immediately, but must be written into memory.
Answer: C

Juniper   JN0-120 examen   JN0-120   JN0-120

NO.8 You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of
user and a password of mypass. Which configuration command accomplishes this goal.?
A. host userpc 10.10.0.156 ftp user mypass
B. host userpc 10.10.0.156 tftp user mypass
C. hostname userpc 10.10.0.156 ftp user mypass
D. hostname userpc 10.10.0.156 tftp user mypass
Answer: A

Juniper examen   JN0-120   certification JN0-120   certification JN0-120   certification JN0-120

NO.9 Which protocol is used to transfer files to on the ERX Edge Router? (Choose two.)
A. SCP
B. FTP
C. RCP
D. TFTP
Answer: B,D

Juniper   JN0-120   certification JN0-120   certification JN0-120

NO.10 Which configuration command creates a virtual router called isp-1?
A. virtual-router isp-1
B. virtual-router ISP-1
C. virtual-router VR isp-1
D. virtual-router VR ISP-1
Answer: A

Juniper   JN0-120   JN0-120   certification JN0-120   JN0-120   certification JN0-120

NO.11 Which two B-RAS service offerings do not require user authentication? (Choose two.)
A. Routed 1483
B. Bridged 1483
C. PPP over ATM
D. PPP over Ethernet
Answer: A,B

certification Juniper   JN0-120   certification JN0-120   JN0-120   JN0-120

NO.12 Which protocol is used between the RAS and the authentication server in a narrowband network
environment?
A. RADIUS
B. PPP PAP
C. MS CHAP
D. PPP CHAP
Answer: A

Juniper   certification JN0-120   JN0-120 examen   certification JN0-120

NO.13 Which two statements are correct concerning DHCP Internal Server in the E-series router? (Choose
two.)
A. Provide dynamic IP addresses for DSIs.
B. Provide connectivity to DHCP servers on other subnetworks.
C. Provide dynamic IP addresses for SRC applications.
D. Provide dynamic IP addresses from pools used for PPPoE subscribers.
Answer: A,C

certification Juniper   JN0-120   JN0-120   JN0-120   certification JN0-120   JN0-120

NO.14 Your ERX router is supporting 100 virtual routers. A specific line module supports IP interfaces in 5
virtual routers. How many routing tables are maintained on that module?
A. 0
B. 1
C. 5
D. 100
Answer: C

Juniper   JN0-120 examen   certification JN0-120   JN0-120

NO.15 You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0. The PVC
should use an unspecified bit rate and be encapsulated in the AAL5SNAP format. Which command
accomplishes this goal?
A. atm pvc 0/33 aal5snap
B. atm pvc 33 0 33 aal5snap
C. atm pvc 0/33 aal5snap ubr
D. atm pvc 33 0 33 aal5snap ubr
Answer: B

Juniper examen   certification JN0-120   JN0-120 examen   JN0-120

NO.16 What does the SRP distribute to the line modules when a routing table changes?
A. updated RIB-Out
B. link-state information
C. an incremental update
D. the complete routing table
Answer: D

certification Juniper   JN0-120   certification JN0-120   certification JN0-120   JN0-120

NO.17 In a bridged 1483 network, which configuration command allows the ERX Edge Router to advertise
customer networks into the provider's IGP?
A. redistribute direct
B. redistribute static
C. redistribute connected
D. redistribute access-internal
Answer: C

Juniper examen   JN0-120 examen   JN0-120 examen   JN0-120   JN0-120

NO.18 You would like to install an OC-48c line module in an ERX 1440 Edge Router. Which slots can support
this configuration?
A. 0 and 1
B. 1 and 2
C. 2 and 3
D. 3 and 4
Answer: C

Juniper examen   JN0-120 examen   JN0-120 examen   JN0-120   JN0-120 examen

NO.19 Given the following router output, which configuration file will the router use at its next reload?
A. config
B. clientqos.cnf
C. startup-config
D. running-configuration
Answer: D

certification Juniper   JN0-120 examen   JN0-120

NO.20 Where should you install the spare line module in a redundancy group?
A. last slot in the chassis
B. first slot in the chassis
C. lowest numbered slot in the group
D. highest numbered slot in the group
Answer: C

Juniper   JN0-120   JN0-120 examen

On peut voir que beaucoup de candidats ratent le test Juniper JN0-120 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Juniper JN0-120 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Juniper JN0-120, Pass4Test peut offrir les Q&As des autres test Certification IT.

Le meilleur matériel de formation examen Juniper JN0-330

La Q&A Juniper JN0-330 de Pass4Test est liée bien avec le test réel de Juniper JN0-330. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Juniper JN0-330 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Choisissez le Pass4Test, choisissez le succès de test Juniper JN0-330. Bonne chance à vous.

Code d'Examen: JN0-330
Nom d'Examen: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))
Questions et réponses: 150 Q&As

Si vous êtes intéressé par l'outil formation Juniper JN0-330 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

L'importance de la position de Certificat Juniper JN0-330 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Juniper JN0-330 par votre première fois.

JN0-330 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-330.html

NO.1 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper examen   JN0-330 examen   certification JN0-330   JN0-330 examen

NO.2 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B

Juniper   JN0-330 examen   JN0-330   certification JN0-330

NO.3 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D

Juniper   JN0-330   certification JN0-330   JN0-330

NO.4 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

certification Juniper   certification JN0-330   JN0-330   certification JN0-330   JN0-330   JN0-330

NO.5 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE

Juniper   JN0-330   JN0-330   JN0-330 examen

NO.6 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C

Juniper   JN0-330   certification JN0-330   JN0-330

NO.7 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C

certification Juniper   JN0-330 examen   JN0-330

NO.8 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D

Juniper   certification JN0-330   JN0-330 examen

NO.9 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

certification Juniper   JN0-330 examen   certification JN0-330   JN0-330 examen

NO.10 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C

certification Juniper   JN0-330   certification JN0-330   certification JN0-330

NO.11 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper examen   JN0-330   certification JN0-330

NO.12 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B

Juniper   certification JN0-330   JN0-330   JN0-330 examen

NO.13 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B

Juniper examen   JN0-330 examen   certification JN0-330   JN0-330 examen   certification JN0-330

NO.14 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D

Juniper   JN0-330   JN0-330   certification JN0-330   JN0-330   certification JN0-330

NO.15 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD

Juniper   JN0-330 examen   JN0-330

NO.16 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE

certification Juniper   JN0-330   JN0-330

NO.17 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B

Juniper examen   certification JN0-330   certification JN0-330   JN0-330   JN0-330

NO.18 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB

certification Juniper   JN0-330   certification JN0-330

NO.19 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper examen   JN0-330   JN0-330   JN0-330

NO.20 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC

Juniper   JN0-330   JN0-330 examen   JN0-330 examen

NO.21 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

certification Juniper   JN0-330   JN0-330   JN0-330 examen

NO.22 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD

Juniper examen   JN0-330 examen   JN0-330   JN0-330 examen   certification JN0-330

NO.23 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper   certification JN0-330   certification JN0-330

NO.24 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C

Juniper   JN0-330   JN0-330 examen   JN0-330 examen   JN0-330 examen   certification JN0-330

NO.25 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper   JN0-330   certification JN0-330

NO.26 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

certification Juniper   JN0-330 examen   certification JN0-330   JN0-330   certification JN0-330

NO.27 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper examen   certification JN0-330   JN0-330

NO.28 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D

Juniper examen   JN0-330 examen   JN0-330 examen   JN0-330

NO.29 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A

certification Juniper   certification JN0-330   JN0-330 examen

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Juniper JN0-330 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Juniper JN0-330 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Juniper JN0-330 plus facilement avec la Q&A de Pass4Test.

Le matériel de formation de l'examen de meilleur Juniper JN0-632

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Juniper JN0-632 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Juniper JN0-632, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Juniper JN0-632 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.

Code d'Examen: JN0-632
Nom d'Examen: Juniper (Juniper Networks Certified Internet Professional, Security (JNCIP-SEC))
Questions et réponses: 169 Q&As

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Juniper JN0-632. Il n'y a pas de soucis à réussir le test avec une haute note.

Dans cette Industrie IT intense, le succès de test Juniper JN0-632 peut augmenter le salaire. Les gens d'obtenir le Certificat Juniper JN0-632 peuvent gagner beaucoup plus que les gens sans Certificat Juniper JN0-632. Le problème est comment on peut réussir le test plus facile?

Le test Juniper JN0-632 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Juniper JN0-632. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Juniper JN0-632, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Juniper JN0-632. Vous aurez une space plus grande à se développer.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Juniper JN0-632 et passer le test à la première fois.

JN0-632 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-632.html

NO.1 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH.?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: ACE

Juniper examen   JN0-632   JN0-632

NO.2 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

Juniper examen   JN0-632   JN0-632 examen   JN0-632

NO.3 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: BD

Juniper   JN0-632 examen   JN0-632   JN0-632 examen

NO.4 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: BD

Juniper examen   JN0-632   JN0-632 examen

NO.5 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: BCE

Juniper examen   JN0-632   certification JN0-632

NO.6 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

Juniper   JN0-632 examen   JN0-632   certification JN0-632   JN0-632

NO.7 Which two statements in a source NAT configuration are true regarding addresses, rule-sets, or rules
that overlap? (Choose two.)
A. Addresses used for NAT pools should never overlap.
B. If more than one rule-set matches traffic, the rule-set with the most specific context takes precedence.
C. If traffic matches two rules within the same rule-set, both rules listed in the configuration are applied.
D. Dynamic source NAT rules take precedence over static source NAT rules.
Answer: AB

certification Juniper   certification JN0-632   JN0-632 examen   JN0-632   certification JN0-632

NO.8 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

Juniper   JN0-632   JN0-632   JN0-632

NO.9 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: AD

Juniper   JN0-632   JN0-632   JN0-632 examen   certification JN0-632

NO.10 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

certification Juniper   JN0-632 examen   JN0-632 examen   JN0-632   certification JN0-632

NO.11 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper examen   JN0-632   certification JN0-632

NO.12 Which two UTM features require a license to be activated? (Choose two.)
A. antispam
B. antivirus (full AV)
C. content filtering
D. Web-filtering redirect
Answer: AB

Juniper   JN0-632   JN0-632   JN0-632

NO.13 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper examen   JN0-632   certification JN0-632   JN0-632

NO.14 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected
Answer: BD

Juniper   JN0-632   JN0-632   JN0-632   certification JN0-632

NO.15 Which statement describes an ALG?
A. An ALG intercepts and analyzes all traffic, allocates resources, and defines dynamic policies to deny
the traffic.
B. An ALG intercepts and analyzes the specified traffic, allocates resources, and defines dynamic policies
to permit the traffic to pass.
C. An ALG intercepts and analyzes the specified traffic, allocates resources, and defines dynamic policies
to deny the traffic.
D. An ALG intercepts and analyzes all traffic, allocates resources, and defines dynamic policies to permit
the traffic to pass.
Answer:

NO.16 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

certification Juniper   certification JN0-632   JN0-632 examen   JN0-632 examen

NO.17 A network administrator has configured source NAT, translating to an address that is on a locally
connected subnet. The administrator sees the translation working, but traffic does not appear to come
back.What is causing the problem?
A. The host needs to open the telnet port.
B. The host needs a route for the translated address.
C. The administrator must use a proxy-arp policy for the translated address.
D. The administrator must use a security policy, which will allow communication between the zones.
Answer: C

Juniper   JN0-632   JN0-632 examen   JN0-632

NO.18 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper   certification JN0-632   JN0-632 examen

NO.19 You must configure a SCREEN option that would protect your router from a session table flood. Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper   JN0-632   JN0-632 examen   JN0-632 examen   certification JN0-632

NO.20 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

Juniper   certification JN0-632   JN0-632   JN0-632   JN0-632

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Juniper JN0-632 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Juniper JN0-632 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Juniper JN0-632 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Certification Juniper de téléchargement gratuit pratique d'examen JN0-694, questions et réponses

Pass4Test est un catalyseur de votre succès de test Juniper JN0-694. En visant la Certification de Juniper, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Juniper JN0-694, la Q&A Juniper JN0-694 est un bon choix pour vous.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Juniper JN0-694. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de JN0-694, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Pass4Test possède un l'outil de formation particulier à propos de test Juniper JN0-694. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Juniper JN0-694 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Juniper JN0-694. Ce ne sera pas un problème à réussir le test Juniper JN0-694 si vous préparez le test avec notre guide d'étude.

Code d'Examen: JN0-694
Nom d'Examen: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
Questions et réponses: 36 Q&As

JN0-694 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-694.html

NO.1 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper   JN0-694   certification JN0-694   JN0-694

NO.2 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper   JN0-694   JN0-694   JN0-694

NO.3 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper   JN0-694   JN0-694   JN0-694 examen

NO.4 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

certification Juniper   JN0-694   JN0-694   certification JN0-694

NO.5 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

certification Juniper   JN0-694 examen   JN0-694   JN0-694

NO.6 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper   JN0-694 examen   certification JN0-694   JN0-694   certification JN0-694

NO.7 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper   certification JN0-694   JN0-694 examen

NO.8 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper   certification JN0-694   JN0-694   JN0-694   JN0-694 examen

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Meilleur ISM CPSM1 test formation guide

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test ISM CPSM1 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test ISM CPSM1, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification ISM CPSM1. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification ISM CPSM1.

Code d'Examen: CPSM1
Nom d'Examen: ISM (Foundation of Supply Management)
Questions et réponses: 128 Q&As

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de ISM CPSM1 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Le test ISM CPSM1 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test ISM CPSM1 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat ISM CPSM1 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test ISM CPSM1 avec l'aide de Pass4Test.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test ISM CPSM1, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat ISM CPSM1. Vous aurez une space plus grande à se développer.

L'équipe de Pass4Test rehcerche la Q&A de test certification ISM CPSM1 en visant le test ISM CPSM1. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test ISM CPSM1 sans aucune doute.

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification ISM CPSM1 via son guide d'étude. Est-ce que vous vous souciez de test Certification ISM CPSM1? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

CPSM1 Démo gratuit à télécharger: http://www.pass4test.fr/CPSM1.html

NO.1 The process of coordinating the organization, planning, scheduling, controlling, monitoring
and evaluating of activities so that the objectives of a project are met is known as:
A. Project Life cycle
B. Project Executive
C. Project Management
D. Project Organization
Answer: C

ISM examen   CPSM1   CPSM1   CPSM1

NO.2 A temporary endeavor undertaken to create a unique product or service is called:
A. Project
B. Build
C. Enterprise
D. Development
Answer: A

certification ISM   CPSM1   CPSM1 examen   CPSM1

NO.3 Organizations less familiar with the discipline of project management usually begin by creating
task forces or committees within each role to tackle problem, known as:
A. Procurement Management
B. Functional structure
C. Procedural structure
D. Performance Management
Answer: B

ISM   certification CPSM1   CPSM1 examen   CPSM1   CPSM1

NO.4 According to Project Management Institute, which of the following is NOT the process group
of project?
Initiating
B. Organizing
C. Executing
D. Closing
Answer: B

certification ISM   CPSM1   CPSM1   CPSM1 examen   CPSM1 examen   certification CPSM1

NO.5 Contract statement of work is the output of which process group?
A. Planning
B. Organizing
C. Monitoring
D. Closing
Answer: A

ISM   CPSM1   certification CPSM1   certification CPSM1   CPSM1 examen

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.