La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test LSI L50-502.
Est-ce que vous vous souciez encore de réussir le test LSI L50-502? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Le Certificat LSI L50-502 est un passport rêvé par beaucoup de professionnels IT. Le test LSI L50-502 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test LSI L50-502. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test LSI L50-502 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A LSI L50-502 pour prendre un essai.
Code d'Examen: L50-502
Nom d'Examen: LSI (LSI SVM5 Solutions Architect)
Questions et réponses: 114 Q&As
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de LSI L50-502 très tôt. Pass4Test peut vous permettre à réussir 100% le test LSI L50-502, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Choisir le Pass4Test vous permet non seulement à réussir le test LSI L50-502, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A LSI L50-502 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.
L50-502 Démo gratuit à télécharger: http://www.pass4test.fr/L50-502.html
NO.1 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C
certification LSI L50-502 L50-502 L50-502
NO.2 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D
LSI examen L50-502 L50-502
NO.3 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C
certification LSI L50-502 L50-502 L50-502 L50-502
NO.4 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A
certification LSI certification L50-502 L50-502 L50-502 certification L50-502
NO.5 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B
LSI examen L50-502 examen L50-502
NO.6 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C
certification LSI certification L50-502 certification L50-502 certification L50-502
NO.7 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D
LSI L50-502 L50-502 L50-502
NO.8 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B
LSI L50-502 L50-502 L50-502
NO.9 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B
LSI certification L50-502 L50-502 examen
NO.10 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D
LSI L50-502 L50-502 examen
NO.11 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B
LSI L50-502 examen L50-502 examen L50-502 L50-502 examen
NO.12 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D
certification LSI certification L50-502 certification L50-502
NO.13 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C
LSI L50-502 L50-502
NO.14 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C
LSI examen L50-502 certification L50-502 L50-502
NO.15 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C
LSI L50-502 examen L50-502 L50-502 examen certification L50-502
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论