Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A CWNP PW0-105 de Pass4Test.
Le programme de formation CWNP PW0-105 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification CWNP PW0-105. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de PW0-105, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Certification CWNP PW0-105 est un des tests plus importants dans le système de Certification CWNP. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test CWNP PW0-105 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test CWNP PW0-105 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification CWNP PW0-105.
Code d'Examen: PW0-105
Nom d'Examen: CWNP (Certified Wireless Network Administrator (CWNA))
Questions et réponses: 120 Q&As
Le test certification CWNP PW0-105 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat CWNP PW0-105 puisse augmenter la compétition dans ce marché.
PW0-105 Démo gratuit à télécharger: http://www.pass4test.fr/PW0-105.html
NO.1 When replacing the antenna of a WLAN device with a similar antenna type that has a higher passive
gain, what antenna characteristic will decrease?
A. Beamwidth
B. Range
C. Active gain
D. Receive sensitivity
E. Fresnel Zone size
Answer: A
CWNP examen PW0-105 PW0-105 certification PW0-105 PW0-105
NO.2 What word describes the bending of an RF signal as it passes from one medium to another medium of
a different density?
A. Diffraction
B. Reflection
C. Refraction
D. Diffusion
E. Scattering
Answer: C
certification CWNP PW0-105 certification PW0-105 PW0-105 examen
NO.3 During the discovery and connectivity process, client and AP stations exchange information about their
supported data rates. After the association, how do client and AP stations select the supported data rate
that will be used to send an 802.11 data frame?
A. During the association, the client and AP agree to use the same transmit rate, but either station can
request a change at any time after the association.
B. The client and AP each choose the optimal data rate to use independently of one another, based on
their own experience of the RF link.
C. The client and AP may use different transmit rates, but the AP determines the data rate that will be
used by each client station in the BSS.
D. The client and AP may use different transmit rates, but the client determines the data rate that it will
use and the data rate that the AP will use when communicating to the client.
E. The client and AP may use a different transmit rates, but the transmit rate is determined by the peer
station, based on the peer's experience of the RF link.
Answer: B
CWNP examen PW0-105 certification PW0-105 PW0-105 examen
NO.4 Given: You are an independent contractor, hired to perform an indoor site survey and network design
for ABC Hotel. The network will support both hotel staff and guest users. You are interviewing the network
manager to determine business, performance, and security requirements for the future 802.11 WLAN.
What questions should you ask the IT manager? (Choose two)
A. What data cabling is currently installed in the rooms and throughout the hotel?
B. How much RF loss do you expect between hotel rooms?
C. Where are the RF dead zones located within the facility?
D. What types of applications will be used by the hotel staff?
E. Are there any radar systems in use at the hotel that would conflict with the WLAN?
Answer: A,D
CWNP examen PW0-105 PW0-105 certification PW0-105
NO.5 What feature(s) are most likely to be supported by 802.11 enterprise-class WLAN controllers? (Choose
4)
A. Link aggregation / port trunking
B. 802.1p and DSCP QoS
C. BGP and Frame Relay
D. Captive web portals
E. IGMP snooping
Answer: A,B,D,E
CWNP PW0-105 PW0-105
NO.6 What component of the 802.11 standard allows stations to reserve access to the RF medium for a
specified period of time?
A. Long slot times
B. DTIM Interval
C. Listen Interval
D. Probe Request frames
E. RTS or CTS frames
Answer: E
CWNP examen PW0-105 examen certification PW0-105 PW0-105 examen PW0-105 certification PW0-105
NO.7 In a long-distance RF link, what statement about Fade Margin is true?
A. Fade Margin is an additional pad of signal strength designed into the RF system to compensate for
unpredictable signal fading.
B. The Fade Margin of a long-distance radio link should be equivalent to the receiver's antenna gain.
C. A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is
clear of obstructions.
D. The Fade Margin is a measurement of signal loss through free space, and is a function of frequency
and distance.
Answer: A
CWNP examen certification PW0-105 PW0-105 PW0-105 PW0-105
NO.8 Given: Your consulting firm has recently been hired to complete a site survey for ABC Company. Your
engineers use predictive modeling software for surveying, but ABC Company insists on a pre-deployment
site visit.
What tasks should be performed as part of the pre-deployment visit to prepare for a predictive survey?
(Choose two)
A. With a spectrum analyzer, identify the type, amplitude, and location of RF interference sources, if any
are present.
B. Evaluate the building materials at ABC's facility and confirm that the floor plan documents are
consistent with the actual building.
C. Validate that the AP transmit power and antenna type is identical for each AP in ABC's existing
deployment.
D. Collect information about ABC Company's security requirements and the current configuration of their
RADIUS and user database servers.
E. Simultaneously capture and analyze data on each 802.11 channel to establish a baseline for potential
network capacity and throughput.
Answer: A,B
CWNP examen PW0-105 examen PW0-105
NO.9 Given:
ABC Company performs top-secret government contract work and has recently purchased an
802.11 Wireless Intrusion Prevention System (WIPS) to enforce their "NO WIRELESS" network security
policy.
What attack type cannot be recognized by the WIPS?
A. Deauthentication
B. MAC Spoofing
C. Protocol Jamming
D. Eavesdropping
E. RF Jamming
Answer: D
CWNP PW0-105 PW0-105 PW0-105 PW0-105
NO.10 What answers correctly complete the following sentence?
____________ and ____________ carrier sense functions are used to determine whether the wireless
medium is idle or busy. (Choose 2)
A. Passive
B. Pseudo-random
C. Virtual
D. Active
E. Physical
F. Interframe
G. Vector
Answer: C,E
CWNP certification PW0-105 PW0-105 PW0-105 examen PW0-105 PW0-105
NO.11 Given:
Network users and IT personnel at a large machinery manufacturer have been discussing the potential
uses and benefits of implementing an indoor WLAN. The network administrator and network manager
have requested a meeting of senior management personnel to discuss a WLAN implementation before
taking any site survey or implementation steps. The first order of discussion in the meeting is corporate
policy concerning implementation and use of WLAN technology.
What specific topics are appropriate in this policy meeting? (Choose two)
A. Vendor hardware recommendations
B. Business justification
C. User productivity impact
D. Antenna types
E. Obtaining permits and zoning requirements
Answer: B,C
certification CWNP certification PW0-105 PW0-105 examen PW0-105
NO.12 What statement best describes the manual RF site survey report?
A. It is a series of notes taken during the interview with the network manager and given to the site survey
project manager.
B. It is a one-page network inspection summary used to create a certificate of network compliance.
C. It contains the results from the RF coverage, capacity, and interference analysis.
D. It is an internal document used by the site surveying firm for network deployment, and is not usually
shown to the client.
E. It states the customer requirements, business justification, and a detailed budget for the WLAN.
Answer: C
certification CWNP PW0-105 PW0-105 examen
NO.13 What facts are true regarding controllers and APs in a Split MAC architecture? (Choose 2)
A. An IP tunnel is established between the AP and controller for AP management and control functions.
B. Using centralized data forwarding, APs never tag Ethernet frames with VLAN identifiers or 802.1p CoS.
C. With 802.1X/EAP security, the AP acts as the supplicant and the controller acts as the authenticator.
D. Management and data frame types must be processed locally by the AP, while control frame types
must be sent to the controller.
E. In a distributed (local bridging) data forwarding model, the AP handles frame encryption and
decryption.
Answer: A,E
CWNP PW0-105 examen certification PW0-105
NO.14 What statement describes the authorization component of a AAA implementation?
A. Verifying that a user is who he says he is
B. Validating client device credentials against a database
C. Logging the details of user network behavior in order to review it at a later time
D. Granting access to specific network services according to a user profile
E. Implementing a WIPS as a full-time monitoring solution to enforce policies
Answer: D
certification CWNP PW0-105 examen PW0-105 certification PW0-105 PW0-105
NO.15 Given: You are the network administrator for ABC Company. Your manager has recently attended a
wireless security seminar. The seminar speaker taught that a wireless network could be hidden from
potential intruders if you disabled the broadcasting of the SSID in Beacons and configured the access
points not to respond to Probe Request frames that have a null SSID field.
Your manager suggests implementing these security practices. What response should you give to this
suggestion? (Choose two)
A. Any 802.11 protocol analyzer can see the SSID in clear text in frames other than Beacons and Probe
Response frames. This negates any security benefit of trying to hide the SSID in Beacons and Probe
Response frames.
B. This security practice prevents manufacturers' client utilities from detecting the SSID. As a result, the
SSID cannot be obtained by attackers, except through social engineering, guessing, or use of a WIPS.
C. Although it does not benefit the security posture, hiding the SSID in Beacons and Probe Response
frames can be helpful for preventing some users (such as guests) from attempting to connect to the
corporate network.
D. Any tenants in the same building using advanced penetration testing tools will be able to obtain the
SSID by exploiting WPA EAPOL-Key exchanges. This poses an additional risk of exposing the WPA key.
E. To improve security by hiding the SSID, the AP and client stations must both be configured to remove
the SSID from association request and response frames. Most WLAN products support this.
Answer: A,C
CWNP examen PW0-105 PW0-105 examen certification PW0-105 PW0-105 PW0-105 examen
NO.16 Why is it recommended for a wireless network administrator to disable 1 Mbps and 2 Mbps data rates
on the WLAN infrastructure? (Choose two)
A. To improve capacity in the BSS
B. To reduce the size of the AP's effective service area
C. To prevent 802.11b devices from associating
D. To maximize the range of the highest data rates
E. To prevent VoWiFi multicast frames
F. To enable support for long preambles
Answer: A,B
CWNP PW0-105 examen PW0-105 examen PW0-105 examen
NO.17 ABC Company has a 2.4 and 5 GHz WLAN deployment supporting four bands in the 5 GHz range
(UNII 1, UNII 2, UNII 2e, and UNII 3). DFS functionality is enabled as required by the regulatory domain.
Band steering is also enabled to encourage dual-band clients to use frequency bands with more capacity.
Your performance analysis shows that many dual-band VoWiFi client devices will move back and forth
between 2.4 and 5 GHz as the user roams throughout the building. All APs have 2.4 and 5 GHz radios
enabled.
This "band hopping" behavior is viewed by network staff to be undesirable. What is the most likely cause
of the unpredictable client band selection behavior?
A. Interference from 5 GHz radar sources has increased frame corruption and retries on channels 36-48
in UNII 1.
B. 5 GHz frequencies offer better RF penetration than 2.4 GHz, but 2.4 GHz offers more voice call
capacity and lower latency than 5 GHz.
C. The voice client does not support DFS, and therefore experiences some 5 GHz coverage holes as it
moves through the network.
D. The client's band selection algorithm prefers 5 GHz, but band steering behavior usually steers 75-85%
of client devices to 2.4 GHz.
Answer: C
CWNP certification PW0-105 certification PW0-105 PW0-105 certification PW0-105
NO.18 What WLAN system feature is required to produce a scenario with the following configuration on a
single access point? (Choose 2)
1. SSID = Guest / BSSID = AA:AA:AA:AA:AA:AA /
VLAN = 22 / Subnet = 192.168.22.0 / RF Channel = 6
2. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 33 / Subnet = 192.168.33.0 / RF Channel = 6 / User Type A
SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 44 / Subnet = 192.168.44.0 / RF Channel = 6 / User Type B
A. Multiple WLAN Profiles
B. Call Admission Control
C. Virtual Cell with SCA
D. Access Categories
E. User-based authentication
F. Dual-radio AP hardware
G. Integrated DHCP server
Answer: A,E
certification CWNP PW0-105 PW0-105
NO.19 Given: You were previously on-site at ABC's facility to conduct a pre-deployment RF site survey. The
WLAN has been deployed according to your recommendations and you are on-site again to perform a
network validation.
When performing this type of post-deployment RF site survey for VoWiFi, what are two steps that must be
performed? (Choose two)
A. Coverage analysis to verify appropriate coverage and roaming boundaries
B. Spectrum analysis to locate and identify RF interference sources
C. Hidden node analysis to identify and relocate existing hidden nodes
D. Protocol analysis to discover channel use on neighboring APs
E. Application analysis with an active phone call on a VoWiFi handset
Answer: A,E
CWNP certification PW0-105 PW0-105 examen PW0-105 PW0-105 examen
NO.20 What 802.11n technologies require MIMO support on both the transmitter and receiver? (Choose 2)
A. Spatial multiplexing
B. Transmit beamforming
C. Maximal ratio combining
D. Space-time block coding
E. Cyclic shift diversity
F. Short guard intervals
Answer: A,D
CWNP examen certification PW0-105 PW0-105 examen
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
没有评论:
发表评论